Only one path
In a series circuit, components are connected in a single pathway, so the current flows through each component in sequence. If one component fails, the circuit is broken. In a parallel circuit, components are connected in multiple pathways, so the current splits and flows through each component separately. If one component fails, the others will still work.
If turning off one light in a series of lights causes all the lights to turn off, then they are likely connected in a combined circuit. In a combined circuit, the lights share the same pathway for electricity to flow, so interrupting the circuit at one light affects all the lights in the series.
When you have multiple loads in a series, the resistance of the loads is added together allowing very little current to flow through the circuit to power any of the loads, making for a low amperage circuit. If you have your loads in parellel, the resistance of the loads in the circuit is subtracted which allows more current to flow, making for a high amperage circuit.
A closed circuit is necessary for a complete transfer of energy because it allows for the flow of electrons from the energy source to the load and then back to the source. If the circuit is open, the flow of electrons is interrupted, and energy cannot be transferred effectively. Closing the circuit completes the pathway for the energy to move along.
Series circuit has the light bulbs like this: -------------------Ii------------------- I I I I I I I O O I I I I O -----------O---------------O---------I If you unscrew one bulb, the whole, all the others will stop working too. Parallel has the bulbs like this: -------------------Ii------------------- I I I I I I I I I I I I I I ---------------------------------------- I I I-------O------I I I I I I-------O-------I
difference between series is one pathway through circuit,difference between parralal is more then one pathway through circuit.
In a series circuit, there is only one pathway for current to flow from the source, through each component, and back to the source. This means all the components in a series circuit share the same current.
Series Circuit.
A series circuit is wired in one direct pathway, meaning the components are connected end-to-end like a chain. In a series circuit, the same current flows through each component, so if one component fails, the entire circuit will be disrupted.
yes
A circuit that has only one path for the current is called a series circuit. In a series circuit, the components are connected end-to-end, creating a single pathway for the flow of electricity. This means that the current passing through each component is the same, making series circuits useful for applications where a consistent current is needed.
Yes, a flashlight typically uses a series circuit to light up. In a series circuit, the components are connected end to end, creating a single pathway for the current to flow. This allows the batteries to power the light bulb in the flashlight.
Depending on what type of circuit your talking about.If the circuit is in parallel,series/parallel,then your talking as many loads that there are on the circuit.However if your dealing with the basic series,then there are the going out and coming back in. so two.and that's not including the ground path. ANSWER :Only one path and there is from a positive to a less positive potential
one
The pathway through which electricity travels is called a circuit. A circuit consists of a closed loop for the flow of electric current.
In a series circuit, there is only one pathway for the movement of charges, through all the components connected in a single loop. This means that the current passing through each component is the same, as it is determined by the total voltage applied and the total resistance of the circuit.
In a parallel circuit, the components are connected in a way where each component has its own separate path for current to flow. This means that if one component fails, the others can still work. In a series circuit, the components are connected in a single path, so if one component fails, it can disrupt the entire circuit.