How many liters of water does a shower use?

Answer 1

electrical energy forces the water out.

Answer 2

The average 4 minute shower uses about 10 gallons of water (if using a low flow shower head). If you are using an older model shower head it can be 20 gallons for 4 minutes. The longer your shower, the more gallons of water will be used. Using a newer model shower head means using about 2 1/2 gallons of water per minute.
If they shower for 10 minutes its going to be at least 50 gallons. Every minute is 5 gallons. So don't use so much water!!!!!! Unless u want to pay the water bill!
Modern shower heads in the USA are limited to 2.2 GPM flow; so generally 2.2 x number of minutes in the shower.

Of course if you have a multi-head shower, or a truly ancient shower head, the calculations would be different.
In the USA, most shower heads now control flow to about 2.5 gallons per minute. So if you take a 20 minute shower, you will use 50 gallons. That water will go to the waste treatment plant, where it will be processed and most likely piped to a river or the sea. So, the longer your shower, the more 'good' water is used up that later needs to be processed and sent on its way.

We all waste water when we take long showers. We only need a little bit of water. We waste a lot of good, clean drinking water. When you waste all that water think about how because you are wasting water, people in Africa and Haiti don't have bathing, or drinking water. SO SAVE WATER!!!
This mostly depends on the G.P.M. (Gallons Per Minute) flow rating of the shower head used, and the length of the shower.

Example: If I use a 1.5 G.P.M. shower head, and take a 10 minute shower, I have used 15 gallons.

Personally, i don't always have my shower on full pressure, so in reality, i use less and save water.
That depends on the person. Figure an average of 5 to 10 gallons. You can take an effective shower with 1 liter of water...half to wet down and half to rinse...it helps to not have any hair to shampoo.
The average person uses about 15 to 25 litres when showering and approximately about 50 to 60 litres when bathing. So as you can see showering will save on water and electricity.
There really is no set amount of water that a shower can use....

It actually depends on the number and type of shower Heads (nozzles) that are installed in the shower and the flow rate of the shower head (nozzle)

Some use mutilple shower heads that spray water in many directions..

Some use a single shower head with a pre-set spray pattern..

Some use a single shower head with multi settings that can use different amounts of water...

So the amount of water used can vary greatly....

Here are some simple examples I found by researching different types of shower heads available..

Standard shower with a 2 inch shower head with pre-set spray pattern uses 1.5-2.5 gallons of water per minute....

Standard shower with 3 inch shower head with multiple spray settings 1.0-3.5 gallons of water per minute...

Standard shower with Dual 2 inch shower heads front and back with preset spray pattern uses 3.0-4.0 gallons of water per minute...
Most shower heads these days limit the amount of water flow to less than 3 gallons a minute (usually 2.5 gpm). Multiply this times the amount of minutes you shower and you will have a rough estimate of the water used.

hope this helps!
15-25 gallons

Water Trivia Facts 1. Water is the only substance found on earth naturally in three forms.

True (Solid, liquid and gas) 2. Does water regulate the earth's temperature?

Yes (it is a natural insulator) 3. At what temperature does water freeze?

32 degrees F, 0 degrees C 4. At what temperature does water vaporize?

212 degrees F, 100 degrees C 5. How long can a person live without food?

More than a month

How long can a person live without water?

Approximately one week, depending upon conditions 6. How much of the human body is water?

66% 7. How much of the earth's surface is water?

80% 8. How much water must a person consume per day to maintain health?

2.5 quarts from all sources (i.e. water, food) 9. Of all the earth's water, how much is ocean or seas?

97% 10. How much of the world's water is frozen and therefore unusable?

2% 11. How much of the earth's water is suitable for drinking water?

1% 12. Is it possible for me to drink water that was part of the dinosaur era?

Yes - water is constantly recycled 13. What is the most common substance found on earth?

Water 14. How much water does the average residence use during a year?

Over 100,000 gallons (indoors and outside) 15. How much water does an individual use daily?

Over 100 gallons (all uses) 16. What does a person pay for water on a daily basis?

National average is 25 cents 17. How many community public water systems are there in the United States?

54,000 18. How much water do these utilities process daily?

38 billion gallons 19. What does it cost to operate the water systems throughout the country annually?

Over $3.5 billion 20. How many miles of pipeline and aqueducts are in the United States and Canada?

Approximately one million miles, or enough to circle the earth 40 times 21. What were the first water pipes made from in the US?

Fire charred bored logs 22. Where was the first municipal water filtration works opened and when?

Paisley, Scotland in 1832 23. Of the nation's community water supplies, what percentage are investor-owned?

15 % 24. How many households use private wells for their water supply?

More than 13 million 25. How much water is used to flush a toilet?

2-7 gallons 26. How much water is used in the average five-minute shower?

15-25 gallons 27. How much water is used on the average for an automatic dishwasher?

9-12 gallons 28. On the average, how much is used to hand wash dishes?

9-20 gallons 29. How much does one gallon of water weigh?

8.34 pounds 30. What is the weight of water in one cubic foot?

62.4 pounds 31. How much water drops with an inch of rain on one acre of ground?

27,154 gallons, which weighs 113 tons 32. How much water does it take to process a quarter pound of hamburger?

Approximately one gallon 33. How much water does it take to produce one ton of steel?

62,600 gallons 34. How much water is used to produce a single day's supply of U.S. newsprint?

300 million gallons 35. What is the total amount of water used to manufacture a new car, including new tires?

39,090 gallons per car

36. How much water must a dairy cow drink to produce one gallon of milk?

Four gallons 37. How much water is used during the growing/production of a chicken?

400 gallons 38. How much water is used during the growing/production of almonds?

12 gallons 39. How much water is used during the growing/production of french fries?

6 gallons 40. How much water is used during the growing/production of a single orange?

13.8 gallons 41. How much water is used during the growing/production of a watermelon?

100 gallons 42. How much water is used during the growing/production of a loaf of bread?

150 gallons 43. How much water is used during the growing/production of a tomato?

3 gallons 44. How much water is used during the growing/production of rice?

35 gallons 45. How much water us used during the production of an egg?

120 gallons

http://www.epa.gov/safewater/kids/water_trivia_facts.html

www.china-shower-room.com
There are Many factors to figuring out this question. You would have to know how long the "Average Person" Spends in the shower, The Water Pressure to the Shower (To find out the amount of water used) and Multiply time by Volume. To get an average you would have to survey a cross section of the population and then take those findings and calculate the Averages for this question.
Up to 312 GPM depending on the number of shower heads and supply piping and pressure
A 10-minute shower would consume approximately 25 gallons. (That is 2.5 gallons per minute.)

Answer 3

A typical shower typically takes 44,000 Btu's of energy. Just to warm up one gallon of water in the shower, it takes 440 Btu's.

Answer 4

A normal household shower uses about thirty litres per minute, depending on pressure and settings.

Answer 5

The wattage should be printed on the label fastened to the shower unit.

Answer 6

On average, a 10-minute shower can use around 75-100 liters of water. However, water usage can vary based on factors like the flow rate of the showerhead and individual bathing habits.

Answer 7

What sort of shower?