No, Sodium acetate (NaCH3CO2) contains the positive ion of sodium (Na+), a highly reactive metal. It is the product of acetic acid (CH3CO2H) reacting with sodium hydroxide (NaOH). Sodium acetate is mildly basic.
Ammonium acetate (NH4CH3CO2H) contains the ammonium ion (NH4+) a polyatomic ion composed of the nonmetal nitrogen and hydrogen.
It is the product of ammonia (NH3) reacting with acetic acid.
Ammonium acetate is neutral.
One mole of ammonium acetate is equal to 77.08g (this is the formula weight, FW, of ammonium acetate, which can be found on the side of the bottle). Another way of representing this is 77.08/mol (so, in one mole of ammonium acetate, there are 77.08grams of ammonium acetate).We have to use the FW value to calculate molarity (moles of solute per L of solvent).I am not sure what volume of the 50mM solution is desired, so I will assume that you need 1 L.50mM is equal to 50milli-moles of solute/1 L of solvent, which is the same as 0.05moles/L. This is what the math looks like:77.08g/mol ammonium acetate x 0.05mol/L = 3.854g/LSo, to make a 50mM solution of ammonium acetate in 1L of water, you will need to dissolve 3.854g of ammonium acetate into 1L of water.
No, sodium polyacrylate and sodium percarbonate are not the same thing. Sodium polyacrylate is a superabsorbent polymer used in diapers, while sodium percarbonate is a bleaching agent commonly found in laundry detergents.
Yes, under the right conditions, sodium acetate is flammable. In fact, a mixture of sodium acetate and potassium nitrate, when intimately mixed, and heated, will explode -- sodium acetate is incompatible with strong oxidizers. The reaction is said to be about "one third as powerful" as that between potassium nitrate, potassium carbonate, and sulfur (in a 3:2:1 ratio -- "yellow powder") under the same conditions of slow heating. Do not try this at home (but, if you must, stick to quantities of a gram or less, and use hearing and eye protection, and keep away from anything flammable).
No, ammonium hydroxide (NH4OH) and ammonium chloride (NH4Cl) are not the same. Ammonium hydroxide is a solution of ammonia in water, whereas ammonium chloride is a salt formed from ammonia and hydrochloric acid.
Ionic precipitation reaction:2Na+(aq) + S2-(aq) + Pb2+(aq)+ 2(-OOCCH3)aq --> PbS2(s) + (2Na+(aq) + 2(-OOCCH3)aq)
No, ch3coona (sodium acetate) and nach3coo (sodium acetate trihydrate) are not the same thing. Sodium acetate is the anhydrous form, while sodium acetate trihydrate contains three molecules of water.
One mole of ammonium acetate is equal to 77.08g (this is the formula weight, FW, of ammonium acetate, which can be found on the side of the bottle). Another way of representing this is 77.08/mol (so, in one mole of ammonium acetate, there are 77.08grams of ammonium acetate).We have to use the FW value to calculate molarity (moles of solute per L of solvent).I am not sure what volume of the 50mM solution is desired, so I will assume that you need 1 L.50mM is equal to 50milli-moles of solute/1 L of solvent, which is the same as 0.05moles/L. This is what the math looks like:77.08g/mol ammonium acetate x 0.05mol/L = 3.854g/LSo, to make a 50mM solution of ammonium acetate in 1L of water, you will need to dissolve 3.854g of ammonium acetate into 1L of water.
No, ammonium nitrate and sodium nitrate are not the same. They are different chemical compounds with different properties. Ammonium nitrate is a salt commonly used in fertilizers and explosives, while sodium nitrate is also a salt used in fertilizers and food preservation.
The formula for sodium acetate is CH3COONa and the equivalent weight is the same as the molecular weight (molar mass) which is 82.0343 g/mol.
No. Sodium bicarbonate is NaHCO3, a compound of sodium, hydrogen, carbon, and oxygen. It contains the monatomic sodium ion (Na+) and the polyatomic bicarbonate ion (HCO3-) Ammonium bicarbonate is NH4HCO3, a compound of nitrogen, hydrogen, carbon, and oxygen. It contains the polyatomic ammonium ion (NH4+) and the bicarbonate ion. Due to the acidity of the ammonium ion, ammonium bicarbonate is a less basic than sodium bicarbonate.
They are two different ionic compounds with the same anion, chloride.
Per Skoog and West "Fundamentals of Analytical Chemistry": Sodium acetate in glacial acetic acid acts as a base in the same way the that sodium hydroxide does in water. Sodium acetate (0.1 N) can be standarized using dry potassium hydrogen phthalate (0.5-0.6 g) in glacial acetic acid (60 mL).
Firstly, when sodium acetate (CH3COONa) solidifies, it does not form "ice". It just becomes solid. This happens when the sodium acetate is heated to about 100oC, then cooled below its freezing point. When a foreign substance with the same crystal structure as sodium acetate is introduced, or a nucleation centre is provided, the sodium acetate will warm up to its freezing point and freeze at its (supposed to be) freezing point.
No, sodium chloride (table salt) and ammonium chloride are different compounds. They have different chemical formulas (NaCl and NH4Cl, respectively) and physical properties. Sodium chloride is commonly used as a seasoning and food preservative, while ammonium chloride is used in various applications like in cough medicines and as a flux in soldering.
No, sodium polyacrylate and sodium percarbonate are not the same thing. Sodium polyacrylate is a superabsorbent polymer used in diapers, while sodium percarbonate is a bleaching agent commonly found in laundry detergents.
Yes, under the right conditions, sodium acetate is flammable. In fact, a mixture of sodium acetate and potassium nitrate, when intimately mixed, and heated, will explode -- sodium acetate is incompatible with strong oxidizers. The reaction is said to be about "one third as powerful" as that between potassium nitrate, potassium carbonate, and sulfur (in a 3:2:1 ratio -- "yellow powder") under the same conditions of slow heating. Do not try this at home (but, if you must, stick to quantities of a gram or less, and use hearing and eye protection, and keep away from anything flammable).
All Lente preparations have the same aqeous solution. It contains glycerin as a cosolvent and stabilizer, sodium acetate as a buffer, sodium chloride for tonicity, and methylparaben as a preservative.