answersLogoWhite

0

Melted plate material reappears by way of what?

volcanoes

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Earth Science

If a material has a hardness of 8 can it not be scratched by a material with a hardness of 7?

Yes, a material with a hardness of 8 can scratch a material with a hardness of 7, but not the other way around. Hardness is a measure of a material's resistance to scratching, so a material with a higher hardness value can scratch a material with a lower hardness value.


How do you separate the dirt out dirty snow?

One way to separate dirt from dirty snow is to let the snow melt in a container, allowing the dirt to settle at the bottom. You can then carefully pour off the melted water, leaving the dirt behind. Another method is to filter the melted snow through a fine mesh sieve to capture the dirt particles.


What type of plate margin formed the Himalayas?

the Himalayas were formed by a collision plate boundary, meaning that the plates collided and formed the Himalayas. The Himalayas are also referred to as 'fold mountains' because of the way in which they are made.


What is it called when two tectonic plates colide?

It's referred to as a Convergent Boundary If 2 Continental Plates --> Mountains If 2 Oceanic Plates --> Subduction of Heavier (older) Plate If Continental-Oceanic --> Oceanic Plate slides under the Continental Plate (Subduction of Oceanic)


What way did the Krakatoa plates move?

The Krakatoa plates moved in a convergent manner, where the Indo-Australian Plate subducted beneath the Eurasian Plate. This movement led to the intense volcanic activity and eventual eruption of Krakatoa in 1883.

Related Questions

Why a plate dropped is shattered is a physical change?

When you drop the plate, all the pieces are still made of the same material as the plate when it was whole. The drop just changed the way it looked and nothing else.


How do you get melted rubber off of a car surface?

melt it off again, the same way you melted it on there


Can light be melted?

No light has no mass its only an energy. There would be no way to capture it. Therefore light can not be melted. <><><><><> Actually, light does have mass, but that has nothing to do with whether or not it can be melted.


How does a tire crusher machine work?

Impact Crusher machine Working Principle:High-speed rotation of the rotor on the hammer, on the material into the crushing chamber produce high-speed impact is broken, and so that the material has been broken along the tangent direction of the crushing chamber at high speed rammed into the other side of the counter plate, was again broken, and then rebound from the counter board to board hammer, to repeat the process. To and from the way, are there any strike against each other the role of materials. As the material by the plate hammer blow, and the counter plate and the material between the impact of the collision, the material constantly cracks, loose Erzhi smash. When the particle size is less than counter-plate and plate hammer when the gap between, they were discharged. Adjust counter space between the frame and the rotor can reach out to change the material shape of particle size and material purposes.


Why melting of iron reversible?

metal melting is a reversible change because as soon as you make the melted metal and freeze it, it might not come back the way it was but at least it is still the same metal material that you had.


Another way of saying melted in a science way?

change of state from solid to liquid?


Which way is the Indo-Australia plate moving?

I don't know, which way is the Indo-Australia plate moving?


How cenvection current move material in the mantle and lithospere?

The convection currents whether moving toward or apart can influence the movement of the plates. Here is a drawing: <---..................... ---> __________ _________ This is an example of a divergent boundary ..<--- ......................---> | ......^ ...............^ ........| | .......|.................|.........| V ......| ................| ........V .----> .....................<---- If the convection............Like this, then -->that way currents move like this the plate will move the plate <--that way PS. Sorry about the dots


How do you get melted plastic off concrete?

The easiest way to get melted plastic off of concrete is using a heat gun. You can heat it and them absorb with a porous scrap cloth.


How do you get melted vacuum cleaner belt out of your carpet?

One way to remove melted vacuum cleaner belt from carpet is to carefully scrape off as much of the melted material as possible using a blunt tool, like a butter knife. Then, use a solution of warm water and mild detergent to gently blot the area, repeating until the residue is removed. You can also try using a carpet cleaning solution or contacting a professional carpet cleaner for assistance.


How does subduction st converging plate boundaries lead to the formation of volcanoes?

The older denser plate sinks under a deep ocean trench into the mantle. Some rock above the subducting plate melts and forms magma. Since the magma is less dense than the surrounding rock, it rises toward the surface. Eventually, the magma breaks through the ocean floor, making a volcanoe.


How does Major Kovaloff get the nose back on his face?

On the way to Riga