A piece of any magnetic material, like iron or steel (a nail, knitting needle, bolt etc.) is take and placed on a bench or a table. A bar magnet is brought close to the magnetic material (say an iron piece AB). One end of the bar magnet is stroked against it, moving from end A to end B of the iron piece. When the bar reached end B, it is lifted and the stroke is repeated from A to end B. This procedure is repeated several times, keeping two things in mind:
(a) The same pole of the bar magnet should be used every time
(b) Strokes should be in the same direction
By stroking the iron piece with the north pole of the bar magnet, end A becomes the North Pole, and end B the South Pole. If you bring the South Pole of any magnet close to end A now, what will you observe? You will observe that the two attract, which simply proves that end A acquires the North Pole.
refers to various ways of making a magnet from magnetic materials.they include: stroking method, electrical method, magnetism through hammaring among others*Induction *Stroking method : 2 types which are single touch method and double touch method *Electrical method ( By keeping the material to be magnetized in a solenoid and passing Direct current through it)The three methods to make magnet are:induction: the process of producing a electric or magnetic effects in a material with an electric charge or a magnet.stroking: is the process of rubbing in one direction.electricity: is a process to do with electric charge, particularly the use of electric energy.The three methods of making magnets are:1. Single touch method2. Double touch methodand by electrical method.
It was noticed that magnetizing a steel bar could be made easier by the use of the double touch method. Procedure: 1.Place a steel bar on a flat surface. e.g a table 2.Then two strong bar magnets are struck on the steel bar with their opposite poles striking the steel bar on either side AB.e.g the north pole of one magnet strikes side A and the south pole of another magnet strikes side B. 3.The magnets are moved to the centre and when they reach the centre,they are taken back to their original places in a magnetic field of way. 4.This stroke is repeated for several times until A and B gain a polarity. 5.You will notice that A will get the opposite polarity as B.i.e A will become the south pole while B will become the north pole.
To reset a maximum and minimum thermometer with a magnet, hold the magnet close to the reset button. Move the magnet around the button in a circular motion to clear the previous maximum and minimum readings. Once the display is clear, remove the magnet and the thermometer will be reset.
not always as the south pole of a magnet is magnetic yet it repels another south pole. :D
The magnetic field would propagate through the material and extend itself for the length of the magnetic material in contact. As long as there is contact there is no pole present. When contact is broken the pole would be the opposite to the pole it was in contact with
The double touch method involves stroking a ferrous material (such as iron) with a magnet in the same direction twice. This aligns the magnetic domains within the material, creating a temporary magnet. The material will only remain magnetic while in contact with the original magnet.
double touch method is better
To magnetize an iron nail using the stroking method, you can stroke the nail with one end of a magnet in a consistent direction many times. This allows the domains in the iron to align in the same direction, creating a magnetic field in the nail. The nail will then act like a magnet with a north and south pole.
refers to various ways of making a magnet from magnetic materials.they include: stroking method, electrical method, magnetism through hammaring among others*Induction *Stroking method : 2 types which are single touch method and double touch method *Electrical method ( By keeping the material to be magnetized in a solenoid and passing Direct current through it)The three methods to make magnet are:induction: the process of producing a electric or magnetic effects in a material with an electric charge or a magnet.stroking: is the process of rubbing in one direction.electricity: is a process to do with electric charge, particularly the use of electric energy.The three methods of making magnets are:1. Single touch method2. Double touch methodand by electrical method.
The single-touch method involves rubbing a magnet along the length of the material in one direction. The double-touch method involves alternating the direction of the rub after each stroke along the length of the material, effectively exposing both ends of the material to the magnetic field. Both methods help align the magnetic domains within the material, resulting in magnetization.
It was noticed that magnetizing a steel bar could be made easier by the use of the double touch method. Procedure: 1.Place a steel bar on a flat surface. e.g a table 2.Then two strong bar magnets are struck on the steel bar with their opposite poles striking the steel bar on either side AB.e.g the north pole of one magnet strikes side A and the south pole of another magnet strikes side B. 3.The magnets are moved to the centre and when they reach the centre,they are taken back to their original places in a magnetic field of way. 4.This stroke is repeated for several times until A and B gain a polarity. 5.You will notice that A will get the opposite polarity as B.i.e A will become the south pole while B will become the north pole.
No.
You need to do the experiment. If the magnet is strong enough, metal (steel, iron) will jump to the magnet (or pull the magnet towards it).
no, magnet needs to be close to winding, not touching it
Negative and negative sides of a magnet do not touch. opposites attract. Negative and positives touch.
Single Touch Systems was created in 2001.
Because you touch your self at night.