0
What else can I help you with?
Wells from which pressurized water flows to the surface are called?
Artesian wells. These wells tap into water sources where the water is under pressure, causing it to flow naturally to the surface without needing a pump. This occurs when the water-bearing layer is confined between layers of impermeable rock.
How deep in the water is one atmosphere?
4 atmospheres is about 135.6 feet of water depth.
What is the boundary of an advancing mass of cold air?
The boundary of an advancing mass of cold air is called a cold front. It is where the cold air mass meets and displaces a warmer air mass, leading to lifting of the warmer air and potential weather changes such as precipitation and thunderstorms.
How many degrees below zero is -34 degrees Celsius?
-34 °F is equal to -36.67 °C The conversion formula is Celsius temperature = 5/9 x (Fahrenheit temperature - 32)
Why is mercury used in barometers instead of water?
Because it has a high density... meaning that the volume increase or decrease due to altitude change is can be viewed in a practical sized barometer. If water, which had a much lower density, was used instead of mercury, the barometer must be at least 15m high.
What is the Average passenger airline flying altitude?
34 thousand feet
Wells from which pressurized water flows to the surface are called?
Artesian wells. These wells tap into water sources where the water is under pressure, causing it to flow naturally to the surface without needing a pump. This occurs when the water-bearing layer is confined between layers of impermeable rock.
Why barometric condenser leg height limit is 34 feet?
The barometric condenser leg height limit of 34 feet is primarily due to atmospheric pressure. At sea level, atmospheric pressure can support a column of mercury approximately 34 feet high (or about 29.9 inches of mercury). When using water, the height limit is about 33.9 feet, as water is less dense than mercury. Beyond this height, the pressure difference becomes insufficient to maintain the column, leading to potential vacuum conditions and loss of condensate return.
What is the area of 34 tiles measured at 34 by 34 feet?
39304 square feet.
What is 18 34 in feet?
To convert 18 feet 34 inches into feet, first convert the inches to feet. Since there are 12 inches in a foot, 34 inches is equal to 34 ÷ 12 = 2.83 feet. Therefore, 18 feet 34 inches is equal to 18 + 2.83 = 20.83 feet.
How many square feet are 34 x 15 foot?
Assuming the the 34 is feet and not another unit, 34 feet x 15 feet = 510 square feet.
What is the altitude of Xian China?
108:55E 34:15N
Why does my 1989 camaro have a code 34?
mass air flow sensor or manifold pressure sensor. your car will have either or.
What is the air pressure for 16 inch tires?
34 PSI, but I the tires should have the suggested PSI written on the side of them.
What is bigger 100 feet or 34 yards?
It is 34 yards which is 102 feet
How many feet in 34 inches?
34 inches = 2.83333333 feet (2 feet 10 inches)
How many yards and feet are equal to 34 feet?
34 feet equals 11 yards and 1 foot
