What is grain size?

Answer 1

you can change the grain size of a metal by heating it up to its melting point and then allowing it to cool again. the longer it takes to cool the larger the grain size will be, the shorter it takes to cool the smaller the grain size will be.

the larger a grain size is, the easier the metal is to manipulate, such as lead, the smaller the grain size is, the harder the metal is to manipulate, such as tungsten

Answer 2

Grain is a small region of a metal, having a given and continuous crystal lattice orientation. Each grain represents small single crystal.

Grains form as a result of solidification or other phase transformation processes. Grains shape and size change in course of thermal treatment processes (for example recrystallization annealing). The normal grain size varies between 1µm to 1000 µm.

Grain structure of a solid is an arrangement of differently oriented grains, surrounded by grain boundaries.

Formation of a boundary between two grains may be imagined as a result of rotation of crystal lattice of one of them about a specific axis.

Depending on the rotation axis direction, two ideal types of a grain boundary are possible:

• Tilt boundary - rotation axis is parallel to the boundary plane;

• Twist boundary - rotation axis is perpendicular to the boundary plane;

• An actual boundary is a "mixture" of these two ideal types.

Grain boundaries are called large-angle boundaries if misorientation of two neighboring grains exceeds 10º-15º.

Grain boundaries are called small-angle boundaries if misorientation of two neighboring grains is 5º or less.

Grains, divided by small-angle boundaries are also called subgrains.

Grain boundaries accumulate crystal lattice defects (vacancies, dislocations) and other imperfections, therefore they effect on the metallurgical processes, occurring in alloys and their properties.

Since the mechanism of metal deformation is a motion of crystal dislocations through the lattice, grain boundaries, enriched with dislocations, play an important role in the deformation process.

Diffusion along grain boundaries is much faster, than throughout the grains.

Segregation of impurities in form of precipitating phases in the boundary regions causes a form of corrosion, associated with chemical attack of grain boundaries. This corrosion is called Intergranular corrosion.

Answer 3

Metals are made up of lots of individual crystals known as grains. different grains may have different alignments (i.e. the repeating pattern of atoms in the grain will point in a different direction to those in a neighbouring grain). In some cases they may also have differences in chemical composition (e.g. steel may split into cementite, perlite and ferrite grains).

Grains size is generally determined by heat treatment, particularly cooling rates. grains can vary from micron sizes to several centimetres.

fast cooling rates from molten metals results in small grains, slow cooling rates in larger ones. grains can grow larger (at the expense of their neighbours) if a metal is heated to near it's melting point.

you can see grains in most metals by polishing, etching and examining under a microscope.

Answer 4

Grain size refers to the average size of individual grains or particles in a material, such as metals or rocks. It can affect the material's properties and characteristics, like strength, hardness, and porosity. Grain size is commonly measured using microscopy or other specialized techniques.

Answer 5

You can change grain size in a metal by heating the metal and the slower you allow it to cool the larger the grain size.

Answer 6

Grain size refers to the size of the particles or mineral crystals which make up a rock.