Steel is iron alloyed with carbon, usually less than 1% and then run through a blast furnace to remove as much of the impurities that case weakening
Steel wool is mainly steel and hence iron in the elemental state. However, some oxide will reside on the surface. This will be Iron III Oxide and some Iron II oxide. So traces of Iron II and Iron III ions will be present.
Sodium hydroxide and hydrochloric acid can both react with steel wool to produce hydrogen gas. Sodium hydroxide may also corrode the steel wool by forming iron oxide. Hydrochloric acid can dissolve the steel wool as it reacts with the iron to form iron chloride.
No it is not Although it can be in very fine powdered form. http://www.analytyka.com.mx/tabla%20periodica/MSDS/Fe/IRON%20POWDER.htm
Iron ore lumps: size 10-40mm Iron ore fines: Granular size of up to 10 mm for up to 90% of the cargo. While lumps are crushed to 5-20mm size in crusher, normally 30% fines (waste) will be generated.For More Details Plz Visit at: steelmkts.com (Like, Ms Ingot, Scrap, Sponge Iron, Pig Iron, TMT, Rebars, Iron Ore, Wire Rod, Angle, Channle, Girder, HR/CR Coils, Billets, Iron Pellets, Rolling, Metals,etc. Prices) OR Call +91-98888-14974Iron & Steel Price in Mandi Gobindgarh, Steel & Iron Prices Of Ludhiana, Iron & Steel Prices in Mumbai, Steel Prices in Maharashtra, Steel & Iron Prices of Jammu, Iron Prices of Kolkata, Steel & Iron Rates in Durgapur,Steel & Iron Rates in Bangloure, Steel & Iron Rates in Bhavnagar, steel price in Tamil Nadu, Steel & Iron Prices in Chennai, Iron Price in Ahmedabad, steel price of Alang, Iron rates of Ghaziabad, Steel & Iron Price in Hydrabad,steel prices of Jaipur, Iron and Steel Prices in Bhiwari, steel price of Mujaffarnagar, iron & steel Rates in Raipur, iron prices of Rourkela, steel prices in Raigarh, Steel Prices of Nagpur, Iron & steel prices in Orissa,Steel Information and Marketing System
idk....im askn youh..aint youh lik suppsd 2 noe evrithin
turns in to steel
Iron
Melted iron combined with carbon creates steel.
Iron is the element that, when combined with carbon, makes steel. Carbon content in steel can range from 0.2% to 2.1%, influencing the properties of the resulting steel alloy.
Coal and iron ore are often combined to make steel. The coal is used as a source of carbon in the steelmaking process, while the iron ore provides the necessary iron content. The two materials are melted together in a blast furnace to produce molten steel.
Iron wool gains mass when it is burnt because the oxygen in the fire oxidizes and rusts the iron. The additional oxygen molecules on the iron wool in the form of rust increases the mass of the wool.
good question actually carbon and iron react together to make steel but coal although it does contain carbon it also contains nitrogen and oxygen and is already reacted to form steel carbon needs to react with iron so if the carbon could be extracted from coal and then heated up with iron it would indeed form steel but it is a lot of hassle and would be rather expensive.
When iron and sulfur are combined, they form iron sulfide. Iron sulfide is a compound with the chemical formula FeS and it is a solid black powder.
Your answer is steel. Nuff Said!
An apoferritin is a form of ferritin which is not combined with iron.
== ==
AISI stands for American Iron and Steel Institute.