soap >;)
No, sodium chloride (table salt) cannot be used to make soap instead of lye. Lye (sodium hydroxide or potassium hydroxide) is the essential ingredient needed to saponify fats and oils to make soap. Sodium chloride does not have the same chemical properties to facilitate the soap-making process.
The sodium hydroxide turns the grease into soap, which is soluble in water (the grease isn't). When water is flushed down the drain, the soap gets taken with it, and removes the grease causing the blockage.
When sodium hydroxide is poured into oil, it initiates a chemical reaction called saponification. This reaction breaks down fats and oils into glycerol and soap molecules. The sodium hydroxide, also known as lye, acts as a catalyst in this process.
Potassium hydroxide (KOH) is the alkali most often used in making handmade liquid soaps.
This is Sodium Hydroxide (NaOH) dissolved in ethanol (CH3CH2OH), this must be done in advance because it takes a bit of time for the NaOH to dissolve in the ethanol as long as you have the equivalents correct.
Soap is an organic salt made by reacting fats or oils with sodium hydroxide or potassium hydroxide through a process called saponification.
NO soap is madi out of sodium hydroxide which is a base
A soap whose manufacture involves potassium hydroxide is what potassium-based soap is.Specifically, soap-making demands heating fats with a strong base. One such base is potassium hydroxide. The interaction produces potassium salt when the natural fat stearol converts to soap.
Saponification is the process of making soap by reacting fats or oils with an alkali such as sodium hydroxide or potassium hydroxide. Esterification is the chemical reaction between an alcohol and a carboxylic acid to form an ester and water. Both processes are important in organic chemistry for creating different compounds with specific properties.
Soap is produced in the saponification reaction, where fats or oils react with a strong base, typically sodium hydroxide or potassium hydroxide, to form soap and glycerol.
No, sodium chloride (table salt) cannot be used to make soap instead of lye. Lye (sodium hydroxide or potassium hydroxide) is the essential ingredient needed to saponify fats and oils to make soap. Sodium chloride does not have the same chemical properties to facilitate the soap-making process.
Potassium hydroxide is used to prepare only liquid soaps. Soaps resulted from the saponification of fats with KOH are liquids or viscous. Soaps resulted from the saponification of fats with NaOH are solids.
One basic ingredient of soap is lye, also known as sodium hydroxide or potassium hydroxide, which is needed to facilitate the saponification process that turns fats or oils into soap.
Sodium hydroxide is commonly used as an alkali in the process of making solid soap, while potassium hydroxide is used for liquid soap. These alkalis are mixed with oils or fats to undergo a chemical reaction known as saponification, which results in the formation of soap.
The by-products of saponification of fats and oils are soap (salts of fatty acids) and glycerol (also known as glycerin). Saponification is the chemical reaction between fats and a strong base (such as sodium hydroxide or potassium hydroxide) to produce soap molecules and glycerol as a result.
Potassium sulfate is not typically used to make soap. Soap is usually made from fats and oils that undergo a chemical reaction called saponification with an alkali, such as sodium hydroxide (lye) or potassium hydroxide. Potassium sulfate is not a common ingredient in soap-making due to its different chemical properties.
Because sodium hydroxide is used in the saponification process of fats.