The precise boiling point will vary, due to the incredibly complex nature of ingredients that go into your average forecourt petrol, but around 95oC at a standard atmospheric pressure of 1 bar.
http://www.engineeringtoolbox.com/boiling-points-fluids-gases-d_155.html
-22f or -30c is the freezing point of kerosen
Yes, billowy black smoke is a characteristic of fire generated by kerosene. Kerosene tends to burn with a dark, smoky flame due to its incomplete combustion at lower temperatures. It is important to ensure proper ventilation and use in well-ventilated areas to minimize the amount of smoke produced.
Due to high percentage of carbon the kerosene oil is not converted inti carbon dioxide and water on combustion but some quantity of the carbon is escaped as unburned particles which are responsible for smoke or its black colour. flame is due to emmition of light at slower rate.
There is only one substance in the universe which does not ever freeze no matter how cold it gets, and that is the element helium - it can be liquified, but it never freezes. Everything else will freeze at a sufficiently cold temperature, including kerosine.
I would suspect iodine to be more soluble in alcohol than kerosene because iodine is a polar compound and so it alcohol. Kerosene is non polar. Now should you mix them? Don't think so! Iodine is a strong oxidizer and can react with the alcohol or the kerosene. This may likely cause a fire or explosion if conditions where right.
To start a kerosene fire, you'll need to pour kerosene onto a fire-safe surface, form a small mound, and create a small depression in the center. Light the kerosene at the depression point using a match or lighter, ensuring you follow all safety precautions and regulations for starting and maintaining fires.
The aniline point of kerosene is 60-69 oC.
Pouring water on a kerosene fire can spread the flames and cause the fire to intensify due to the kerosene's ability to float on top of the water. This can make the situation more dangerous and difficult to control. It is better to use a fire extinguisher or sand to smother the fire.
oint of kerosene is -22F
The boiling point of kerosene is typically around 302-572 degrees Fahrenheit.
The flash point of diesel is typically around 52-96°C (126-205°F), while kerosene has a flash point of around 37-65°C (100-150°F). The fire point for diesel is usually higher than its flash point, around 52-96°C (126-205°F), while for kerosene, it is around 46-74°C (115-165°F).
Care has to be taken for kerosene because when it is exposed to air,it may ignite with it and catch fire and leads to a major fire
The flashpoint of kerosene is typically around 38-74°C (100-165°F), depending on the specific grade and composition of the kerosene. This is the temperature at which it can produce enough vapors to ignite in the presence of an ignition source. It is important to handle and store kerosene carefully to prevent fire hazards.
yes.
LPG (liquefied petroleum gas) catches fire more easily than kerosene. This is because LPG is a highly flammable gas, while kerosene is a combustible liquid that requires a higher temperature to ignite.
dont do that you could set it on fire
-22f or -30c is the freezing point of kerosen