0
What else can I help you with?
Can you separate water and Aniline using separating funnel?
At 20o C aniline's rate of solubility in water is 3.6g/mL. So, aniline mixes with water unlike kerosene which forms a layer above the water. Separating funnel is used to separate two immiscible liquids and cannot separate miscible liquids. Hence, we cannot separate water and aniline using separating funnel.
What is the significance of aniline point test?
The aniline point test is significant in assessing the aromatic content of petroleum products, particularly fuels and lubricants. It measures the lowest temperature at which equal volumes of aniline and the sample will mix, indicating the degree of saturation and the presence of aromatic hydrocarbons. A lower aniline point suggests a higher aromatic content, which can affect the fuel's properties, such as its combustion efficiency and emissions. This test is essential for ensuring compliance with environmental regulations and optimizing fuel performance.
Which burns slower kerosene or gasoline?
Kerosene burns slower than gasoline because it has a higher flash point and is less volatile. This means that kerosene requires more time and heat to ignite and burn compared to gasoline.
What if ice cubes are put in kerosene?
If ice cubes are put in kerosene, the ice will melt due to the higher temperature of the kerosene. Kerosene has a lower freezing point than water, so it will not freeze the water in the ice cubes. The ice will eventually melt and mix with the kerosene, but they will not chemically react with each other.
What is the correct increasing order of evaporation of petrol alcohol kerosene water?
The correct increasing order of evaporation is: water, alcohol, kerosene, petrol. Water evaporates the fastest due to its low boiling point, followed by alcohol, kerosene, and then petrol, which has the highest boiling point.
What is the difference between Aniline Point and Mixed Aniline Point?
There is no any such difference between Aniline point and mixed Aniline point . . . . .
Is the aniline point highest for arromatics?
no aromtics show the low aniline point....because higher the aniline point higher the pariffinic content and lower the aromatic content
What the deferent between aniline point and the poling point?
aniline point is the lowest temp in f in wich equal volume of aniline and dieasel are completely missble. Poling point is that temp in which aromatic compounds are not freezed
Is Aniline point is a property of lpg?
no
How can you improve aniline point of an oils?
To improve the aniline point of oils, one can fractionate the oil to remove lighter components, adjust the chemical composition to increase the aromatic content, or add specific additives that can raise the aniline point. Additionally, removing any contaminants or impurities that can lower the aniline point can also help improve it.
Freezing point of kerosene water mixture?
oint of kerosene is -22F
What is the boiling point for kerosene in Fahrenheit?
The boiling point of kerosene is typically around 302-572 degrees Fahrenheit.
Can you separate water and Aniline using separating funnel?
At 20o C aniline's rate of solubility in water is 3.6g/mL. So, aniline mixes with water unlike kerosene which forms a layer above the water. Separating funnel is used to separate two immiscible liquids and cannot separate miscible liquids. Hence, we cannot separate water and aniline using separating funnel.
What is the significance of aniline point test?
The aniline point test is significant in assessing the aromatic content of petroleum products, particularly fuels and lubricants. It measures the lowest temperature at which equal volumes of aniline and the sample will mix, indicating the degree of saturation and the presence of aromatic hydrocarbons. A lower aniline point suggests a higher aromatic content, which can affect the fuel's properties, such as its combustion efficiency and emissions. This test is essential for ensuring compliance with environmental regulations and optimizing fuel performance.
Does kerosene have a high melting point?
yes.
Which type of titration involved in the estimation of aniline?
Aniline can be estimated using acid-base titration. In this process, a known concentration of acid is added to a solution containing aniline until the equivalence point is reached, indicated by a color change due to the formation of a salt. This helps in determining the concentration of aniline present in the solution.
What are the boiling points of petrol and kerosene?
-22f or -30c is the freezing point of kerosen
