Undefined.
A pressure difference is also known as a pressure gradient.
The temperature gradient of an oil well refers to the change in temperature per unit depth below the surface. It varies depending on factors such as the geothermal gradient of the region and the specific characteristics of the well. Generally, the temperature gradient in oil wells ranges from 0.02 to 0.05°C per meter of depth.
The term for the increase in temperature with depth in the Earth is called geothermal gradient. This gradient is typically around 25-30°C per kilometer in the Earth's crust.
The slope of the water table is called the hydraulic gradient. This gradient represents the rate of change in water table elevation over a specific distance. It is an important factor in determining the direction and velocity of groundwater flow.
A steeper gradient of a stream allows it to flow faster, carrying more energy that can be used to erode soil and rock more efficiently. Slower-moving streams with a gentler gradient have less energy available for erosion.
If you are asking about the correct gradient. It is 1:40 (meters)
One drain outlet is sufficent provided the drain outlet to the sewer line or to the gully outside has the correct gradient fall.
The distance is not really important as extra piping and fittings can be used, but making sure you have a good gradient is of the utmost importance
find the gradient
The answer depends on the gradient of WHAT!
basically the reciprocal of the original lines gradient is going to be the gradient for the perpendicular line (remember the signs should switch). For example if i had a line with the gradient of 3, then the gradient of the perpendicular line will be -1over3. But if the line had the gradient of -3, then the line perpendicular to that line will have the gradient 1over3.
(-1.5,0) (1.5,0) what is the gradient?
these tiles are gradient.
Danube river gradient
Draw a tangent to the curve at the point where you need the gradient and find the gradient of the line by using gradient = up divided by across
Gradient= Vertical gain / Horizontal distance Hope this helps ;P
The gradient of the line was two-thirds.