Zero . the heating value in general refer to the amount of energy released per each meter cube of the element combusted.
CO2 is noncombustible gas.
The gram molecular mass of carbon dioxide is about 44.01 grams. By definition, this value is the number of grams of carbon dioxide that contains Avogadro's Number ("AN") of molecules. Avogadro's Number is about 6.022 X 10^23. Therefore the number of molecules in 1 gram is (1/44.01)(AN) or 2 X 10^21 molecules, to the justified number of significant digits.
The average heating value of heating oil is around 138,500 Btu per gallon. Since there are approximately 3.785 liters in a gallon, one liter of heating oil would contain about 36,600 Btu.
The molar mass of CO2 is Mr (C)=12.01 Mr (0)=16.00 Therefore, the molar mass is (12.01+(16.00x2) since there are 2 oxygen atoms then the molar mass will be doubled for oxygen therefore, Molar Mass=48.01 g/mol
the hardness vlaue of carbon very much depends on the value of the hardness of the carbon. if it is a high value then the hardness is high however if it is a low value then it is a low hardness helpful??? :D
There will be difference in value of fixed carbon and carbon in ultimate analysis as some carbon is lost in hydrocarbons in volatile matter. Fixed carbon is arrived by substracting the volatile matter. Utimate analysis ditermines the total carbon content which includes the carbon present in volatile matter. Fixed carbon is useful to know how much coke can be generated out of coking coal.
Carbon dioxide react with sodium hydroxide.
Lower Heating Value (LHV) MJ/kg = 43.4 Higher Heating Value (HHV) MJ/kg = 46.5
Implementing sustainable heating systems in residential buildings can lead to reduced energy costs, lower carbon emissions, improved indoor air quality, and increased property value.
Carbon dioxide react with sodium hydroxide.
Gases do not have a pH as pH is a measure of hydrogen ion concentration in solution in water. Carbon dioxide is sparingly soluble in water and mostly forms very weakly ionised carbonic acid. pH will be close to 7.
There is no specific number of BTUs in one cubic meter of carbon monoxide (CO) gas. The amount of BTUs in a gas is determined by its composition and heating value, which can vary. However, carbon monoxide generally has a lower heating value compared to other gases like methane or propane.
CO2 is a compound of carbon and oxygen, very stable, in a state of low chemical energy, with very little value.
The heating value isthe amount of heat produced by combustion of a unit quantity of a fuelWe differentiate between gross and net heating values:Gross (or high, upper) Heating ValueThe gross or high heating value is the amount of heat produced by the complete combustion of a unit quantity of fuel. The gross heating value is obtained whenall products of the combustion are cooled down to the temperature before the combustionthe water vapor formed during combustion is condensedNet (or lower) Heating ValueThe net or lower heating value is obtained by subtracting the latent heat of vaporization of the water vapor formed by the combustionfrom the gross or higher heating value.For further information Contact: Tauseef Awan email adress microengineer.tauseef@gmail.com mob:+92306-8859595
Petroleum coke (petcoke) has a high heating value due to its high carbon content. Its heating value is typically around 14,000-15,000 BTU/lb (32.6-34.9 MJ/kg), making it a valuable fuel source for applications requiring high heat input.
carbon dioxide oxygen nitrogen happy face monkey face stupid face carbon dioxide oxygen nitrogen happy face monkey face stupid face
It depends on the partial pressure of the gaseous carbon dioxide, but its pH value is usually 5.7 .
The reaction is:2 CO O2 = 2 CO2