In a bridge circuit the unknown resistor is compared to the rheostat. When the meter across the bridge reads in the middle the unknown and the rheostat are the same value.
Direct Measurement: Apply the instrument directly to the unknown quantity. E.g. Taped distance, direction measured with a theodolite Indirect Measurement: Determined from its relationship to direct measurements. E.g. height difference determination in trigonometric leveling
1.10
the color is unknown
the elevation of the ocean is currently unknown
chemical analysis
just to find out our given unknown resistance value or to put it another way, To find the value of the unknown resistor attached.
Wheatstone bridge is used to calculate the resistance of unknown resistor in the circuit.
forcing a constant current and measuring the voltage across the unknown resistor.
1-determination of ferrous [Fe+2] ion in a sample solution in(g\L).2-determination of (ferrous and ferric )in a mixture. 3-determination of purity of KClO3 sample. 4-determination of [fe+2] in unknown sample. 5-determination of total iron [Fe] in an iron ore. 6-determination of [Fe+3] in a sample. 7-determination of available chlorine in bleaching powder.
The purpose is to prepare a sample solution for analysis.
A: If you know the total resistance and total voltage then you know total current flow for the circuit, this current will be same for every resistor in series however the voltage drop will change for each resistor . So measuring the voltage drop across the resistor in question and divide by the total current will give you the resistor value.
A resistor in parallel with a voltages source will not cause the voltage to drop, theoretically. To get a 20 volt drop you need a resistance in series, and the number of ohms is 20 divided by the current in amps. If the current is unknown or variable, the voltage can't be dropped by using a resistor.
The purpose of the Watergate break- in was.......that there was another tape famously features an 18 1/2 minute gap of unknown purpose or origin.
You don't use unknown variables to solve an equation. The purpose of solving an equation is to find the value of the variable so that it's no longer unknown.
"Mixed melting point determination" is a term used in chemistry. Organic substances have a fixed temperature at which they liquify. If a chemist wants to determine the nature of an unknown substance, he can determine it by these means. If the unknown substance does not melt at the usual temperature, it can be said to be impure. If the chemist has two unknown substances and wants to determine what they are, he may mix equal parts of each and start the liquification process. If the combination melts at the usual temperature, the chemist can say that both are the same. If the chemist wants to determine the nature of an unknown substance, he may mix a fixed amount of a known substance with a fixed amount of an unknown substance, it can be estimated, what the unknown substance is.
The purpose of the Watergate break- in was.......that there was another tape famously features an 18 1/2 minute gap of unknown purpose or origin.
It was in a way a religion, they made it to help understand the unknown.