It is known as filament. filament
It is called a filament and usually made of tungsten steel.
the bulb will light up
thin, hair like clouds are called cirrus clouds
Global Water
Copper Wire
When electric current flows through filament of the bulb, the electrons are squased among themselves due to the thin structure of the bulb. This causes them to emit light. Due to the gases filled in the light bulb, the bulb glows.
tungsten
The wiring inside the light bulb is very thin (the filament) and glows when heated. The current through the thin wire heats up the filament wire so that it will glow. See the related link 'How Light Bulbs Work'.
filament
filament
When a current is passed through a thin wire filament it gets hot. Insulate the filament in a glass envelope with no air, and the filament glows brightly.
Electricity through a thin wire (filament) makes it glow, which is prevented from burning through the wire by gas inside the bulb.
Filament
Simply put, no. A light bulb lights up because the filament inside (the thin wire that often breaks) has a lot of resistance in it, then when electricity flows through it, it heats up and glows brightly.
Filament is a thin part of incandescent bulb which is the source of electric light that electric current passes through and heated it until it produce light.
First let us understand the different parts that go to make up the light bulb shall we? The key component in a light bulb is the filament, this filament, ususually a thin piece of wire, is connected to two contact points. These points are then connected to the metal base of the bulb. When the bulb is attached to the light socket a circuit is then made. As the thin wire is part of the circuit it will have electicity passing through it when the power is switched on. The bulb glows because of the filament is thinner than that of the rest of the circuit. The filament gives off heat energy and begins to glow, this glowing we call light energy. You now have two forms of energy.
An electric current passes through a thin filament, heating it until it produces light. The enclosing glass bulb prevents the oxygen in air from reaching the hot filament, which otherwise would be destroyed rapidly by oxidation.