1/2
The concentration of calcium hypochlorite in bleach varies depending on the brand and type of bleach. However, most household bleach solutions contain around 5-6% sodium hypochlorite, which is the active ingredient derived from calcium hypochlorite.
The weight of sodium hypochlorite (bleach) varies depending on the concentration. Bulk users (municipal water treatment, manufacturing, cooling towers) most frequently use 12.5% sodium hypochlorite which weighs 10 lbs. per gallon.
Calcium chloride is a solid and therefore is not measured by gallons. The weight of a gallon of calcium chloride solution would depend on the concentration of said solution.
Well, isn't that a happy little question! Calcium chloride is actually heavier than water, so 1 gallon of calcium chloride would weigh more than 8.33 pounds. In fact, 1 gallon of calcium chloride typically weighs around 10.2 pounds. Just remember, every gallon is a world of its own, so it's important to check the specific weight of the calcium chloride you have.
A UK gallon also known as an imperial gallon is larger. An imperial gallon is 4.5L and a US gallon is 4L
You use 1/2 of a canteen cup.
You use 1/2 of a canteen cup.
You can use 1 ampule of calcium hypochlorite to disinfect a 5-gallon water container by mixing it with a ratio of 1 canteen cup of water. This will create a chlorine solution that can then be added to the 5-gallon water container for disinfection purposes. Be sure to follow recommended guidelines and instructions for proper mixing and application.
Use one ampule of calcium hypochlorite to 1/2 canteen cup of water. (The desired chlorine residual should be 1ppm)
The best hypochlorous acid recipe for disinfecting surfaces effectively is to mix 1 gallon of water with 1 tablespoon of bleach (sodium hypochlorite). This solution is recommended by the CDC for disinfection purposes.
The concentration of calcium hypochlorite in bleach varies depending on the brand and type of bleach. However, most household bleach solutions contain around 5-6% sodium hypochlorite, which is the active ingredient derived from calcium hypochlorite.
Pool shock is calcium hypochlorite. Liquid bleach is sodium hypochlorite. Liquid pool shock is sodium hypochlorite. Yes, they are all basically the exact same things, the only difference is which metal they are bonded with for delivery and stability. Calcium hypochlorite is the granulated form of pool chlorine. It is useful if you have an in ground plaster/concrete/gunite/tile pool as it supplies calcium to the water to help maintain hardness. Sodium hypochlorite is liquid form. This is useful to use if you have a vinyl lined pool since you don't need to maintain elevated calcium hardness in these types of pools. Household bleach (non scented) is 6% sodium hypochlorite by solution. Liquid pool chlorine is 10%-12% sodium hypochlorite by solution. Granulated chlorine is 65% calcium hypochlorite. 10oz of granulated chlorine = 1/2 gallon of liquid pool chlorine = 1 gallon of household bleach. These measurements will raise the chlorine level by 5ppm in 10,000 gallons of water. Registered CPO (Certified Pool Operator) with the National Swimming Pool Federation http://www.nspf.com/ and maintaining public access swimming pools for many years (Pulled this from yahoo) http://answers.yahoo.com/question/index?qid=20070608193348AActO7L
The recommended bleach to gallon of water ratio for disinfecting surfaces effectively is 1:10, meaning 1 part bleach to 10 parts water.
The weight of sodium hypochlorite (bleach) varies depending on the concentration. Bulk users (municipal water treatment, manufacturing, cooling towers) most frequently use 12.5% sodium hypochlorite which weighs 10 lbs. per gallon.
about 1 gallon at a dose rate of 5 parts per million, dah
Calcium chloride is a solid and therefore is not measured by gallons. The weight of a gallon of calcium chloride solution would depend on the concentration of said solution.
The recommended Clorox water ratio for disinfecting surfaces effectively is 1/3 cup of bleach per gallon of water.