Along mid-ocean ridges.
Yes, you can potentially use your well for geothermal energy depending on factors such as the depth and flow rate of the well. A geothermal heat pump system can utilize the stable temperature of the underground water to heat and cool your home efficiently. It's best to consult with a professional geothermal contractor to assess the feasibility and design a suitable system for your well.
Geothermal energy is considered renewable because it is derived from the heat stored in the earth's crust, which is continuously replenished by the natural heat-generating processes within the planet. However, the rate at which heat is replenished may vary depending on location and geological conditions.
Yes, fundamentally geothermal energy is NOT a renewable resource. The souge heat for geothermal energy is the heat from Earth's core (caused by the fission of heavy, radioactive isotopes). This heat is dissipating and will not be renewed. Also where geothermal energy is extracted, the turnover rate in the crustal rocks is so slow that the heat source is quickly cooled to the point of exhaustion. (Note, highly volcanic areas are an exception to this).
The average production of geothermal energy per unit varies depending on the specific geothermal resource and technology used. On average, a geothermal power plant can produce between 500-3,500 kWh per unit of energy depending on factors such as the temperature and flow rate of the resource.
no you can never run out of gethermal energy. it is the heat from the earth's core which has been running for billions of years and won't stop soon. also, the earth absorbs heat from the sun and contains it so geothermal energy won't end until billions of years later when the sun does no you can never run out of gethermal energy. it is the heat from the earth's core which has been running for billions of years and won't stop soon. also, the earth absorbs heat from the sun and contains it so geothermal energy won't end until billions of years later when the sun does
Yes, you can potentially use your well for geothermal energy depending on factors such as the depth and flow rate of the well. A geothermal heat pump system can utilize the stable temperature of the underground water to heat and cool your home efficiently. It's best to consult with a professional geothermal contractor to assess the feasibility and design a suitable system for your well.
actual heat flow rate/ideal heat flow rate if the whole fin was the same temperature as the base of the fins This applies to finned surfaces usually in heat exchangers
Geothermal energy is considered renewable because it is derived from the heat stored in the earth's crust, which is continuously replenished by the natural heat-generating processes within the planet. However, the rate at which heat is replenished may vary depending on location and geological conditions.
Yes there is an optimum flow rate. Kind of! The heat pump manufacturer will post on the internet or in the users guide what the maximum and mimimum flow rate through his heat pump should be. I take it that the optimum then, is anywhere within that range. My pump manufacturer prescribes 20 GPM to 70 GPM for the heat pump I will be using. Too low a flow causes the heat pump to overheat. Too high a flow is hard on system components. dburr
In most realistic situations heat flow can be said to occur from a region of higher temperature to one of lower temperature. As the region of higher temperature loses heat and the other region gains heat their temperatures become closer and the rate of heat flow diminishes. If, however, it can be contrived to maintain the source of heat at a constant temperature and the destination of the heat also at a constant temperature, then the heat will flow between the two at a constant rate, called steady heat flow.
Heat effects the flow rate of lava because the hotter the lava is, the less viscous it is which allows it to flow faster than if it had a slow flow rate. If it has a low temperature, then the flow rate will be much slower because it has a high viscosity.
There is no nice and easy formula to calculate what is being asked. Turbines and generators will have different efficiency curves. Nothing was mentioned about the pressure of the steam in the question. As the temperature and pressure of the steam rise, a pound of steam will contain more energy that can be used by the turbine. In general, though, 20,000 to 25,000 pounds of steam an hour flowing through a plant will give one megawatt of production. It is important to note this is for a power plant. The residential geothermal energy that is being used in houses is not a suitable energy source for power production.
The rate of flow of the heat through of a solid area can be found by dividing the volume by the cross sectional area.
The factors that are affected by number of tubes in shell and tube heat exchanger is the rate of heat transfer and flow rate.
Yes, fundamentally geothermal energy is NOT a renewable resource. The souge heat for geothermal energy is the heat from Earth's core (caused by the fission of heavy, radioactive isotopes). This heat is dissipating and will not be renewed. Also where geothermal energy is extracted, the turnover rate in the crustal rocks is so slow that the heat source is quickly cooled to the point of exhaustion. (Note, highly volcanic areas are an exception to this).
Geothermal gradient is the increase of temperature in relation to the increasing depth in the Earth's interior. The Earth's internal heat source comes from the joined forces of residual heat from planetary accretion and heat produced through radioactive decay. It may also come from other sources.
The average production of geothermal energy per unit varies depending on the specific geothermal resource and technology used. On average, a geothermal power plant can produce between 500-3,500 kWh per unit of energy depending on factors such as the temperature and flow rate of the resource.