The only mineral with a hardness of 10 on Moh's scale is diamond.
The scale used to measure the hardness of a rock is called the Mohs scale. It ranges from 1 (softest) to 10 (hardest) with each level representing a different mineral's ability to scratch another.
Serpentine rock has a wide range of hardness depending on its composition, but it typically falls between 2.5 and 4 on the Mohs hardness scale.
The hardness of a rock is identified using Mohs Scale of Hardness. Certain rocks and minerals have a predetermined hardness level based on this scale, which uses the obvious logic that if something scratches something else, then it must be harder than that which it scratches. Likewise, if something doesn't scratch something else, it must be softer than that which it cannot scratch. Using a scale from 1 to 10, common objects can be used to determine hardness level. A fingernail, for example, has a hardness of 2.5. Any rock that can be scratched by a fingernail (talc, for example) has a hardness less than 2.5. A streak plate, which is commonly used for hardness tests, has a hardness of 6.5. Diamonds, the hardest minerals, define the 10 on the hardness scale. Using these common objects and their related hardnesses, one can easily identify the rock in question.
depends a rock made from lava is an igneous rock.
The Mohs hardness scale is a commonly used hardness scale for minerals. It is on a scale from 1 to 10 (1 being the softest and 10 being the hardest). You can purchase Mohs hardness kits which has a variety of minerals with known hardnesses that you can test your rock against. What you will do is try and scratch your rock with the minerals in the kit. If the mineral in the kit removes material from your rock then your rock is softer. Continue up or down the scale until you find where your rock lies, probably in between two rocks. It will be difficult to measure if your rock is something like sandstone or has an inconsistent composition because certain parts of the rock will be harder than others and sandstone has a very loose bond. Talc (1 on the scale) is one of the softest minerals and diamond is the hardest (10 on the scale). Onyx is also very hard (9 on the scale). If you don't have a scale then you can use your fingernail which is approximately 2.5, a penny is approximately a 3.5, glass is a 5.5, and a knife is a 7.
Rocks are made up of minerals, which can have varying levels of hardness. The only mineral to have a hardness of 10 is diamond.
diamond
Diamond
diamond
Rocks are made up of minerals, which can have varying levels of hardness. The only mineral to have a hardness of 10 is diamond.
this question is stupid
The hardness of a rock is commonly measured using the Mohs scale of mineral hardness. This scale ranges from 1 to 10, with talc at 1 (the softest) and diamond at 10 (the hardest). Each mineral on the scale can scratch those below it, providing a relative measure of hardness.
The scratch test is used to determine a rock's hardness on the Mohs scale, which ranges from 1 (softest) to 10 (hardest). By scratching a rock with a known mineral or material of a specific hardness, you can compare the scratch to known hardness values to classify the rock. This test helps in identifying the rock's mineral composition and potential uses based on its hardness.
The rock that is rated 10 on the Mohs scale of mineral hardness is diamond. Diamonds are renowned for their exceptional hardness, making them the hardest natural material known. This property allows them to scratch other substances and is why they are commonly used in cutting tools and jewelry.
Conglomerate is a sedimentary rock formed of other large stones. It apparently has a hardness of 9 on the Hardness scale... 10 being diamond...
The scale used to measure the hardness of a rock is called the Mohs scale. It ranges from 1 (softest) to 10 (hardest) with each level representing a different mineral's ability to scratch another.
The test commonly used to determine the hardness of a rock is the Mohs scale of mineral hardness. It rates the hardness of minerals on a scale of 1 (softest) to 10 (hardest) based on their ability to scratch one another.