answersLogoWhite

0

Because you are using scrap metal rather than iron that is needed

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Earth Science

Is it economical to use scrap iron to get copper?

It is not economical to use scrap iron to obtain copper because the process would require significant energy and resources to separate the two metals. It would be more cost-effective to obtain copper directly from sources that already contain the metal, such as copper ore or recycled copper products.


How would you separate copper strands and iron filings?

One way to separate copper strands and iron filings is by using a magnet. Copper is not magnetic but iron is, so you can use the magnet to attract and separate the iron filings from the copper strands. Alternatively, you could also use the difference in density between copper and iron to physically separate them using techniques like flotation or panning.


How do you do copper coating on iron powder?

Contacting the iron powder with an aqueous solution of copper (II) salts will produce a copper coating on iron powder: Iron is higher in the electromotive series than copper and therefore will displace copper from the solution, resulting in copper-coated iron and dissolved iron cations. When all of the surface of the iron powder has been coated with copper, the iron will stop reacting because it no longer has access to the copper ions in solution, the access of the iron being blocked by the layer of copper coating the remaining iron powder.


How can you separate iron nails from copper tacks?

One way to separate iron nails from copper tacks is to use a magnet. The iron nails will be attracted to the magnet, allowing you to easily separate them from the copper tacks.


Does a magnet attrack to copper?

No, they won't. Copper, while it is a good conductor of electricity, is not a ferromagnetic material, and a magnet won't be magnetically attracted to it. (They will stick to anything if you use enough glue!)

Related Questions

Why is economical to use scrap iron to get copper?

Because you are using scrap metal rather than iron that is needed


Is it economical to use scrap iron to get copper?

It is not economical to use scrap iron to obtain copper because the process would require significant energy and resources to separate the two metals. It would be more cost-effective to obtain copper directly from sources that already contain the metal, such as copper ore or recycled copper products.


Why is it economical to use scrap iron to get copper?

Well, honey, using scrap iron to get copper is economical because iron is cheaper than copper, so it's a cost-effective way to get your hands on some shiny copper without breaking the bank. Plus, recycling scrap iron is good for the environment, so you can feel like a frugal eco-warrior while you're at it. Just make sure you know what you're doing so you don't end up with a hot mess instead of a copper treasure.


Why is it economical to use scrap iron?

It is more simple to obtain steel from scraps comparing with the extraction of minerals from a mine.


Do steel investment foundries make use of iron scrap?

Steel investment foundries make use of iron scrap


What is an everyday use for scrap heap magnets?

They are used everyday to move scrap iron around the scrap yard...


For separation of copper and iron what you can use?

you can use magnetic separation by passing a magnet through the copper and iron


How would you separate copper strands and iron filings?

One way to separate copper strands and iron filings is by using a magnet. Copper is not magnetic but iron is, so you can use the magnet to attract and separate the iron filings from the copper strands. Alternatively, you could also use the difference in density between copper and iron to physically separate them using techniques like flotation or panning.


How much is scrap metal per pound?

There are many different types of scrap metals - There is ferrous (iron, steel HMS) and non ferrous scrap metals (copper, aluminum, zinc, etc.). You need to specify the type of scrap metal you have in order to obtain proper pricing. Copper for example is around $3.50 cents for bare brite copper whereas Scrap Steel #1 Busheling is around $450.00 gt Use a magnet to quickly identify your scrap metals - ferrous take to a magnet, non ferrous do not


Can you use an iron spatula to stir a solution of copper sulphate?

It is not recommended to use an iron spatula to stir a solution of copper sulfate as the iron can react with the copper sulfate solution and potentially contaminate or alter the solution. It is best to use a glass or plastic spatula for stirring solutions containing copper sulfate.


How do you do copper coating on iron powder?

Contacting the iron powder with an aqueous solution of copper (II) salts will produce a copper coating on iron powder: Iron is higher in the electromotive series than copper and therefore will displace copper from the solution, resulting in copper-coated iron and dissolved iron cations. When all of the surface of the iron powder has been coated with copper, the iron will stop reacting because it no longer has access to the copper ions in solution, the access of the iron being blocked by the layer of copper coating the remaining iron powder.


How can you separate iron nails from copper tacks?

One way to separate iron nails from copper tacks is to use a magnet. The iron nails will be attracted to the magnet, allowing you to easily separate them from the copper tacks.