Because of there are some active ingredient which can degrade or lost of their properties due to direct expose of CFL light and generated impurities cause of product can be fail. So, SV light is low wavelength which cannot affect the API.
sodium vapour lamps produce much higher light output (about 90 lumens/watt) they cannot be used in lighting applications where colour-rendering property is very crucial. This is because most of the light emitted from a sodium vapour lamp is concentrated in the yellow part of the visible spectrum (around 580-590 nm) On the other hand, a mercury vapour lamp is quite suitable for lighting applications. This is because, the mercury vapour lamp can feed almost the entire visible region (380-780 nm) of the human visual system.
Sodium is not typically referred to as a photosensitive metal. However, it can exhibit photoelectric effects when exposed to light due to its low work function. This property is utilized in various applications, such as in photocells and photoelectric sensors.
This could be due to the fact that a sodium vapour lamp contains neon gas and when a current is passed through the two electrodes in the lamp the neon gas becomes ionised and shines red until vapourisation occurs and the sodium cause the typical characterised yellow.
The light in Sodium Vapour lamp is from an atomic emission process whereas in Mercury Vapour Lamp it is, finally, from fluorescence emission. The mechanism of light emission in a sodium vapour lamp is simple and straight-forward. The filaments of the lamp sputter fast moving electrons, which hit the sodium atoms(vapour) causing the valence electrons of the sodium atoms to excite to higher energy levels and the electrons thus excited relax by emiting the characteristic monochromatic bright yellow light(589nm). The mechanism in mercury vapour lamp is more involved and sequential. The sputtered electrons from the filaments, after having been accelerated by high voltage, hit the mercury atoms. Here also, the excited electrons of mercury atomsrelax by emitting characteristic but ultravilot(254nm,invisible) light. The photons of this ultravilot light fall on the fluorescent layer on the inner walls of the tube and excite the molecular bonds of the fluorescent material to various electronic and vibrational energy states. Hence, the light from the mercury vapour lamp is white. The basic difference between the two is, the former works by electric discharge (passage of electricity through sodium vapours at high/low pressure) while the latter works through the combined effect of electric discharge through mercury vapours and fluorescence from phosphors (luminescent materials). Although sodium vapour lamps produce much higher light output (about 90 lumens/watt) they cannot be used in lighting applications where colour-rendering property is very crucial. This is because most of the light emitted from a sodium vapour lamp is concentrated in the yellow part of the visible spectrum (around 580-590 nm) On the other hand, a mercury vapour lamp is quite suitable for lighting applications. This is because, the mercury vapour lamp can feed almost the entire visible region (380-780 nm) of the human visual system. Conventional fluorescent lamps can also be called as low-pressure mercury discharge lamps. In this system, when electric discharge strikes mercury vapours held at low pressure ( a few mm of mercury) it produces a lot of ultravilot radiation dominantly at 254 nm inside the column of the discharge tube. This UV radiation when impinging on the white coating made of fluorescent materials coated inside the discharge column of the tube will generate white light(called daylight). Light output from a fluorescent lamp is moderate (60 lumens/watt) while the colour-rendering index is high. posat by Chinmoy kanjilal and Tushar dhara,research scientists,SMIT,Sikkim,India.
Calcium itself is not sensitive to light. However, some calcium compounds or calcium-containing materials, such as calcium hypochlorite, can be sensitive to light and may degrade upon exposure.
By the colour of the light that they emit. Sodium vapour lamps produce yellow/orange light while Mercury vapour lamps produce white light.
Similiar to a flourescent light. The ignitor provides a high voltage potential to excite the sodium gas within the bulb.
Sodium lamps only give monochromatic yellow light and so inhibit color vision at night, and cause less light pullution. You can get more details at blmall.com.
Monochromatic light is light composed of a single wavelength. One example of monochromatic light is the laser, which emits light of a very specific color or wavelength, making it highly monochromatic.
Sodium lighting is more efficient to run than white lights, and it gives an even light with less glare.
Sodium lighting is more efficient to run than white lights, and it gives an even light with less glare.
In a low pressure sodium vapour lamp, argon or neon gas is first heated up to emit a slight red or purple glow. The heat from this warms sodium metal in the light to the point of vaporizing, which is when the familiar yellow glow begins.
sodium vapour lamps produce much higher light output (about 90 lumens/watt) they cannot be used in lighting applications where colour-rendering property is very crucial. This is because most of the light emitted from a sodium vapour lamp is concentrated in the yellow part of the visible spectrum (around 580-590 nm) On the other hand, a mercury vapour lamp is quite suitable for lighting applications. This is because, the mercury vapour lamp can feed almost the entire visible region (380-780 nm) of the human visual system.
Yes, they are sensitive to light.
Sodium lighting is more efficient to run than white lights, and it gives an even light with less glare.
Sodium is not typically referred to as a photosensitive metal. However, it can exhibit photoelectric effects when exposed to light due to its low work function. This property is utilized in various applications, such as in photocells and photoelectric sensors.
yes plants sensitive to light