answersLogoWhite

0

Lightning conductors are not put up to get hit by lightning as such. They can and do get hit by lightning but the expression "conductor" is a misnomer.

They act as a discharge to ground to prevent the buildup of static charge in an approximate "sphere" from the tip of the rod to the surrounding ground. Any lightning strike will tend to go across the surface of this sphere and provide protection for the people under the sphere. Thus standing near the tall building usually gives complete protection. The taller the building the better and wider is the protection

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Earth Science

Why is it necessary to install lighting conductor in multiplex building?

Lightning conductors are installed in multiplex buildings to provide a safe path for lightning to travel down to the ground, protecting the building and its occupants from the destructive force of a lightning strike. Without a lightning conductor, there is a higher risk of damage to the building's structure, electrical systems, and potential safety hazards for occupants.


Does limestone attract lightning?

No, limestone does not attract lightning. Lightning is attracted to the highest point in an area, typically trees, buildings, or tall structures, due to the path of least resistance for electric currents to travel. Limestone is not a conductor of electricity and therefore does not attract lightning strikes.


What items conduct lightning?

Tall, metallic, or organic objects. That's why you're not supposed to hide behind trees or anything tall during thunder storms, and are supposed to lay flat on the ground instead. There's also very, very, very little evidence that says that cell phones might attract lightning, but this hasn't really been proven. Organic objects, like plants and animals, conduct lightning because they contain water. So, although people are also conductors, the best bet to be less of a target of lightning is to stay away from other organic beings. If you're trying to conduct lightning, for like an experiment, stay away from anything rubber. There's recently been a type of plastic that has been manufactured to conduct electricity.


When would lightning strike?

Lightning can strike anytime, but it is most common during thunderstorms when there is a buildup of electrical charges in the atmosphere. Lightning is attracted to tall objects like trees, buildings, and towers, so avoiding open fields, tall objects, and metal structures during a storm can help minimize the risk of being struck.


Where are lightning rods placed?

Lightning rods are typically placed at the highest point of a structure to attract lightning strikes and provide a safe path for the electrical current to travel harmlessly to the ground, thereby reducing the risk of damage to the structure. They are commonly installed on buildings, towers, and other tall structures.

Related Questions

Why are lightning conductors fixed to tall buildings?

Probably a Lightning Conductor. They say , in a Bad Storm, lightning will strike the Tallest building first. Cheers.


How do lightning conductors protect buildings from getting damage during lightning?

Lightning conductors provide a path of least resistance for lightning strikes, guiding the electrical current safely to the ground. This helps prevent the lightning from causing damage to the building's structure or igniting fires by dissipating the electrical charge harmlessly into the ground. By intercepting the lightning strike and safely redirecting it, lightning conductors help protect buildings and their occupants from potential harm.


Why do churches need lightning conductors?

Lightning conductors or rods, protect a building from lightning hits by harmlessly draining of the electrical charge thereby preventing fire or other damage. Churches with steeples that tower over surrounding buildings and trees would be especially likely to attract lightning.


What to avoid when lightning strikes?

Trees, tall buildings, large clearings. Lightning strikes the tallest point.


What are the types of lightning conductors?

The two main types of lightning conductors are Franklin rods, which are tall metal rods that attract lightning strikes and conduct the electricity to the ground, and Faraday cages, which are enclosed metal structures that protect objects inside from lightning strikes by directing the electricity around the outer surface.


What causes lightning to strike certain areas?

Normally lightning will more likely strike areas that are higher in elevation and objects that are good conductors of electricity. The path from cloud to ground is shorter and the required potential is lower. Thus, lightning frequently hits tall hills, tall buildings, and tall trees. Lightning also finds the easiest way to get to the ground without having to cross as much of the atmosphere. Except when ionized, air is not a good conductor. Lightning rods are designed to prevent damage to structures. They give the electric charges an easy path to the ground.


Did Benjamin Franklin make the lightning rode?

Yes so tall buildings could not get shocked.


Why is it necessary to install lighting conductor in multiplex building?

Lightning conductors are installed in multiplex buildings to provide a safe path for lightning to travel down to the ground, protecting the building and its occupants from the destructive force of a lightning strike. Without a lightning conductor, there is a higher risk of damage to the building's structure, electrical systems, and potential safety hazards for occupants.


Who invented lightning rods on buildings?

Benjamin Frankiln. To protect buildings from lightning


How can buildings be protected form lightning?

Tall skyscrapers use lightening rods to direct the lightening away from the building.


Does stainless steel attract lightning?

No, stainless steel does not attract lightning. Lightning is attracted to tall objects, such as trees, buildings, and towers, due to their height and conductivity. Stainless steel is not a significant conductor of electricity and does not attract lightning strikes.


Why lightning protection is needed in high rise building?

Lightning protection is needed in high rise buildings to prevent damage to the structure, electrical systems, and occupants from lightning strikes. Tall buildings are more likely to be hit by lightning due to their height, and without proper protection, the electrical surge can cause fires, equipment damage, and pose a safety hazard to individuals inside the building. Implementing lightning protection measures such as rods, conductors, and grounding systems helps to safely redirect the electrical current from a lightning strike to the ground, minimizing the risk of damage and ensuring the safety of the building and its occupants.