one E1 link can be splitted into 32 links by internal boards in BSC. one link generates 64Kpbs so 32 links produces 2.048Mbps signal ( 32x64Kbps=2040Kbps). 1 E1 link splitted to 32 links by boards, and each link has got 8 Timeslots, totally 32x8=256 Timeslots, Means 256 Users can utilize at a time. But, In practice people may use packet calls also, So the whole frame structure cannot be given to Voice circuits. Keeping this in mind we again split the links into Ports such as primay and secondary. primary which is given to Circuit switching and secondary for packet switching. We can assign the timeslots for CS & PS manually depends on the services and operator demand. Eventhough 256 users can utilize, we are using apprx 128 by one E1 link. (16x64Kbps). The circuit switching timeslot figure can be more than 128 sometimes because packet calls requires higher data always. So many of the service providers can have more timeslots for voice than packet switching technique. hope am right. if you find the mistakes pl correct me. Thank you !!!!
There are 63 E1 in one STM 1
16
In sdh radio 63 E1's are there
There are 63 e1's in sdh STM-1 = 63 x E1; STM-4 = 63 x 4 E1; STM-16 = 63 x 16 E1; STM-64 = 63 x 64 E1.
e1
STM-0= 21 E1 lines STM-1=(64x1) - 1 = 63 E1 lines STM-4=(64x4) - 4 = 252 E1 lines STM-16=(64x16) - 16 = 1008 E1 lines STM-64=(64x64) - 64 = 4032 E1 lines and so on
Unframed E1, you will be able to use the full bandwidth of the circuit of 2048 kpbs. Normally, for various reasons, this mode is not given to customers by telco. Costly service Framed E1 ,you will be able to use 1984Kbps only from 2048Kbps where timeslot 0 is reserved for sync and signaling purposes. Less costly when compared with Unframed. Thanks Balaji V Aleti
One STM-4 support Maximum 268 E1's.
2 mb
well E1 is added to many fooods and the thing is is that if you dont eat it you will doe a painfull death!
There is no direct mapping of E1 to DS3. The only way to connect the two is using an MPLS network. A DS3 is 45Mbps. An E1 is 2Mbps. The bandwidth of 22.5 E1's can traverse a DS3. In order to directly connect an E1 as would a T1 to a DS3 you would need an E3 An E3 is 34 Mbps and 16 E1's could connect to it.
Here is a link to Super Mario Bros. Sheet music by Koji Kondo:http://gprime.net/images/mariopianoThe above link has sheet music for:Castle ThemeMain ThemeStar ThemeUnderwater ThemeUnderworld ThemeEnding ThemeOver world Theme 2Super Mario World: Air Platform Theme