0
What else can I help you with?
Which would create the most money?
the initial deposit is $6500 and the required reserve ratio is 20 percent
If the required reserve ratio were 0 percent then money supply expansion would be infinite Why don't we want an infinite growth of the money supply?
P = MV/Q; so if V, velocity of money in final expenditures, and Q, the real value of final expenditures, remain relatively constant, then an infinite growth of money supply will lead to massive inflation.
How to calculate Chain-type real GDP?
[(expenditures ratio with year 1 base year + expenditures ratio with year 2 base year)/2] - 1 For example the growth with year 1 base year is 13%; the growth with year 2 base year is 8%. The formula in numbers would look as follow: [(1.13 + 1.08)/2] - 1 = .105 or 10.5% growth. (Notice where I got 1.13 and 1.08 from, also notice that this is after the constant-dollar real GDP is calculated. Hope this helps!
What is the ratio of the change in consumption to the change in disposable income called?
It is called the marginal propensity to consume, or MPC
What is an aggregate excess structure?
An Aggregate Excess (aka a Deductible) is a predetermined amount that the insured will bear in any one year for all insured losses occuring during that year. The amount can be stated as a dollar amount (ie. $xxxxx), as a percentage of the annual premium (ie. xx% of $AP), or as a predetermined percentge of the loss ratio (ie. insured to bear all losses under xx% of claims/AP%). An Annual Aggregate Excess is normally agreed by calculating the expected losses, using the prior history of insured losses and adjusting for trends etc..
What measures are used to assess the performance of not-for-profit organizations?
measures that are relevant are: (1) the ratio of program expenditures to total expenditures; (2) the ratio of administrative overhead to total expenditures; (3) the ratio of fund-raising expenditures to total expenditures
What is the concrete mixing ratio in m20 concrete?
1:1.5:3:0.45 (cement,fine aggregate,coarse aggregate, water cement ratio)
What are mix design for concrete?
mix ratio is 1 : 2 : 4 cement : fine aggregate : course aggregate
How much aggregate are used in 1bag of cement?
Approximately 5bags of cement are in 1 cu.m concrete ratio 1:3:6 with 20mm aggregate, water-cement ratio 0.5.
How the changing of workability when the concrete mixture containing high aggregate content?
Aggregate to cement ratio is an important thing which affects the workability....! If the aggregate/cement ratio is higher , the concrete will be Leaner. Less quantity of paste is available for lubrication, Hence workability decreases..!! On the other hand if the aggregate/cement ratio is lower, the concrete will be fatty. Higher quantity of paste is available for lubrication. Hence workability increases. ! Thus Higher aggregate content leads to lowering of workability....!
What is the ratio of cement sand and aggregate in M30 mix of concrete?
The ratios of cement to sand to aggregate for the different grades of concrete are as follows. M10 has a ratio of 1:3:6. M15 has a ratio of 1:2:4. M20 has a ratio of 1:1.5:3. M25 has a ratio of 1:1:2, but M30 has no set ratio. It is a designed mixture to achieve the stress tolerance desired.
What is the significance of grading aggregate?
The grading of aggregate influences the mix proportions for a specified workability and water-cement ratio. Coarser the grading leaner will be mix which can be used. Very lean mix is not desirable since it does not contain enough finer material to make the concrete cohesive. The type of aggregate influences strongly the aggregate-cement ratio for the desired workability and stipulated water cement ratio. An important feature of a satisfactory aggregate is the uniformity of the grading which can be achieved by mixing different size fractions.
1 cubic feet of concrete requires how much coarse aggregate and fine aggregate?
it should depend in which construction you going to be used the concrete....means it is used in a house or in a big project like a massive dam...........like the ratio of "C:S:A "C= CEMENT S= SAND(FINE AGREEGATE) A=AGREEGATE (COARSE AGG)IN SOME TIME IT USED AS THE RATIO OF 1:2:4OR 1:1.5:3 AND RATIO IS USED TO FIND THE QUANTITY OF SAD AND AGREEGATE...............1 cubic feet of concrete requires how much coarse aggregate and fine aggregate?ANSWER :Grade is M20 and ratio for M 20 is 1:1.5:3void ratio for cement is 100 % compressivevoid ratio for fine aggregate 20 %void ratio for coarse aggregate 32% , from IS codeNOTE : (that means cement have compressive in 100%fine Aggregate needs compressive in 20 %coarse Aggregate needs compressive 10 32 % , from IS code )total ratio for mix is 1.52cement = 1fine aggregate = 1.5coarse aggregate = 3total is 1 + 1.5 + 3 = 5.5take now all dimension meter only , convert it in feet with end of the solutionCEMENT = [(1 X 1 X 1.52 X) / 5.5 ]= 0.28 m³1 is required quantityAnother 1 is cement ratio1.52 is total compressive for concreteTotal ratio is 5.550 Kg per bag of cement is 0.0347 m³No of bags required for 1 m³ of concrete is.28 m³ / .0347 m³ = 8.07 bags take 8 bagsCEMENT = 9.88 cubic feetFINE AGGREGATE = [ ( 1 X 1.5 X 1.52 ) / 5.5 ) = 0.41 m³Here 1.5 is fine aggregate ratio , remaining is same as above.1 m³ = 35.29 cubic feet1 cubic feet = .03 m³F.AGG = 14.47 cubic feetCOARSE AGGREGATE = [ ( 1 X 3 X 1.52 ) / 5.5 ) = 0.83 m³Here 3 is ratio of coarse aggregateC. AGGREGATE = 29.29 cubic feetANS :CEMENT = 9.88 cubic feetF.AGG = 14.47 cubic feetC. AGGREGATE = 29.29 cubic feetNote : [ 100 cubic feet is 1 brass1 m³ = 35.29 f³1 f3 = 1 m³ / 35.29 = 0.03 m³
What is the Mix ratio for M 7.5 concrete?
For M7.5 the ratio is 1:4:8 i.e 1 part of cement, 1 part of fine aggregate (Sand) and 1 part of coarse aggregate.
How do you calculate forging reduction ratio?
reduction ratio= initial cross sectional area/final cross sectional area
How do you change fraction to ratio?
A fraction is a ratio
How do you find the shrinkage ratio?
SR={((V1-V2)/V2)*100}/(W1-W2) where,SR=srinkage ratio v1=initial volume v2=final w1=initial moisture content w2-final
