0
What else can I help you with?
What is the motherboard speed setting for a Pentium-200?
A Pentium 1 running at 200 Mhz (both MMX and non-MMX) requires a 66 Mhz bus and a multiplier setting of 3.
When was the Pentium 1 invented?
pentium 1 was invented in 1993
What is pentium 1?
The first Pentium computer.
How tri state device can be used to control the direction of a data bus?
tri state devices carry either 0 or 1 which represents the current state o the data bus. If the tri-state device stores 1, then the data bus carries information.If the tri-state device carries 0,then the data bus is empty.
What do you mean by system bus under computer system?
Bus :- Bus is a transmission medium which is used to transfer the data or information from one device to other device. There are three types of bus 1. Address Bus 2. Data Bus 3. Control Bus
What is the memory of Pentium 1?
Pentium 1s are processors. They don't have memory.
Are Pentium 1 Risc Processors or Cisc?
Pentium I processors are CISC.
What is the Intel Pentium 1-4?
Series of processors / Generation of Pentium processors.
The system bus is made up of?
A bus is a group of wires that carries data/information/signals/addresses parallelly. In computer systems, generally, there are 3 buses termed 1.Data bus 2.Address bus 3.control bus collectively these 3 are called SYSTEM BUS. K.M. Anura Wijayasingha
What is the fuel capacity of a 1972 VW Bus tank?
At least a 1/2 oz of good weed!
Four types of buses that might be on a motherboard?
The 4 types are address, data, expansion and video bus. There are three types of buses used on a motherboard: 1. data bus 2. address bus 3. control bus --- Data bus, System bus, Front side bus (FSB), and Host Bus --- The system bus, the PCI Express bus, the PCI bus, the AGP bus, and the outdated ISA bus. --- Front side bus (CPU to northbridge) Graphics Bus (Northbridge To Video Card) Memory Bus (Northbridge to Memory) Internal Bus (Northbridge to Sotuhbridge) PCI Bus (Southbridge to PCI expansion slots).
What is size of copper bus bar for 1000 Amps capacity for a current density of 1.2 amps and 1 amp?
The following sizes of bus-bar will have the capacity to handle 1000 amps, 3/16 x 4", 1/4 x 3 1/2", 3/8 x 2 1/2", and 1/2 x 2".
