To repair a CV joint on a 1999 Saturn SL2, first, safely lift the vehicle and remove the wheel and brake components to access the axle. Disconnect the axle from the hub and the transmission, then remove the damaged CV joint by sliding it off the axle shaft. Replace it with a new CV joint, ensuring to secure all components properly, and reassemble the axle into the vehicle. Finally, reattach the wheel, lower the car, and perform a test drive to ensure proper function.
If the boot is torn, then more than likely the CV joint needs replacing. It at the very least needs to be inspected. You can replace the boot with a repair kit, but I would have the joint inspected.
The Saturn SL2 was produced from the years 1990 to 2002 in the United States. The best way to tell if the fusible link in a 1999 Saturn SL2 is fried is that there will be no 12v.
ON my 1999 sl2 it is the transmission fluid dipstick
You clean or replace it.
it does not have one.
40
It would, if you changed out the trans and the ecm/tcm. The SL2 SC2 transmissions have a different higher reving gear ratio.
I have a 96 Saturn sl2 with 160k going thru 1 qt of oil per week. What can I do to stop it?
On the bottom right of the engine.
Are you asking how to??
Unplug it :D
a 1999 has a 1.9l Dohc