answersLogoWhite

0

If you are talking about the air bag suspension the switch is in the trunk, driver's side, little access panel or disconnect the battery for about an hour and the light will go out.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you reset the airbag system after its deployed?

It is not reset, it is replaced.


When does an airbag module have to be replaced?

An airbag module typically needs to be replaced after a vehicle has been involved in a collision that triggered the airbag deployment, as it can no longer function properly. Additionally, if the airbag warning light remains illuminated on the dashboard, this may indicate a malfunction or fault in the airbag system that requires replacement. Regular inspections and maintenance are also essential for ensuring the airbag system is in good working condition.


How do you reset the air suspension system on a 1991 Lincoln Continental?

go inside side of the trunk on the left side turn of the airbag system go inside side of the trunk on the left side turn of the airbag system


What does the airbag code 411 mean in a 2008 Lincoln Town Car?

The airbag code 411 in a 2008 Lincoln Town Car typically indicates a fault in the driver's airbag circuit, often related to an open or shorted condition. This code may be triggered by issues such as a faulty airbag module, damaged wiring, or a problem with the airbag itself. To resolve the issue, a thorough diagnostic check of the airbag system is recommended to identify and repair the specific cause of the fault.


How do erase air bag service light?

If the airbag service light is on, the airbag system is malfunctioning. The airbag system is offline while the light is on. Every time you start your vehicle, the airbag system does a self-test. If the test reveals a component failure, then it takes the airbag system offline, and turns on the service airbag system light. This is not an indicator like the "maintenance required" or "change oil" lights. Your airbags WILL NOT deploy in an accident, until the malfunctioning component is diagnosed and replaced. Proceed cautiously or have your vehicle towed to your local repair facility. The money that you spend to fix this system, may save a life.


Code 51 on srs system airbag whats the code meaning on a Lincoln mark VII?

Code 51 on the SRS (Supplemental Restraint System) of a Lincoln Mark VII typically indicates a fault with the airbag system, specifically related to the driver's side airbag circuit or the system's internal fault. This could involve issues such as a malfunctioning airbag module, an open circuit, or a problem with the wiring. It's essential to have the system diagnosed using a compatible scanner to pinpoint the exact issue and ensure safety. Always consult a professional mechanic or technician for accurate diagnosis and repair.


What does airbag code 33?

depend on year and make of your Vehicle. if late model Ford/Lincoln, it means your driver side "seat belt pretensionor". (There is small bomb in seat belt retractor related with airbag) if early model Ford/Lincoln (and maybe some GM), it means passenger side airbag "System" Don't take it lightly as "Oh, it's just seat belt pretensionor. Airbag still fine". your airbag may not deploy to avoid injured by airbag, if something malfunctioned with pretensionor.


How do you remove steering wheel airbag on Corolla?

To remove an airbag from the steering wheel of a Corolla first make sure that the airbag system is disabled. Undo the two Tork screws on either side of the wheel. Once this is removed the connector for the airbag should be visible. Push the clip towards to horn pad and it should come out.


How do you replace an AC expansion valve on a 2001Chrysler Concord?

The freon has to be removed and the pressure released from the ac system. Then the valve can be removed and replaced. The system will need to have a vacuum pulled and freon put in again.


How do you unplug the airbag?

To unplug an airbag, first ensure the vehicle is turned off and the key is removed from the ignition. Disconnect the battery to eliminate any power supply, waiting at least 10 minutes for the system to discharge. Locate the airbag connector, usually found under the steering wheel or in the dashboard, and carefully unclip or unbolt it to detach the airbag from the system. Always consult the vehicle's service manual for specific instructions related to your model.


Why is the airbag symbol on in your car?

The airbag system has a malfunction and will not deploy if needed as long as the airbag symbol stays on.


Is it safe to drive when airbag light is on but not flashing and th fuse is remove?

The SRS airbag light will illumninate because the bcm will detect a fault in the SRS system. If the airbag has been deployed then you obviously need to replace the airbag and possibly the srs module. A good out electrician can reset the air bag flag. Driving a car that has airbags with the airbag fuse removed (disabling the air bag) is illegal in most countries.