If you completely fill an ice tray with water, the water will expand as it freezes, potentially causing the ice tray to overflow. This expansion occurs because water expands by about 9% when it freezes. If the tray is filled to the brim, the ice may push against the edges, possibly leading to spills or cracking of the tray. To avoid this, it's best to leave a small gap at the top when filling the tray.
The time it takes for a hot water heater to fill up completely can vary depending on the size of the tank and the water pressure. On average, it can take anywhere from 30 minutes to an hour for a hot water heater to fill up completely.
645divided by 21 equals 30.714. Hence, you can fill completely 30 such containers and 71.4% of the 31st container will be filled with water. Answer two If fill means completely fill, than you can fill 30 containers.
submerge
The bladder should be filled with approximately 2 to 3 liters of water to be completely full.
depends on water pressure, but it should completely fill in 15-20 minutes. the water should be hot in another 20-25 minutes if it has been run completely empty.
Two days. Fill for one day. If not completely full, Continue on second day.
The capacity in gallons of water to completely fill the container.
Yes it is possible to freeze the reusable water bottles overnight. One tip is not to fill it all the way. When water starts to freeze it expands, and if you fill the water bottle completely full, it could explode.
It would probably fill up with water, and then you'd have a water balloon.
fill a glass of water completely and then put ur object in it. the amount of water that is spilled in mL is ur volume in cm3
Fill both, but only remove the radiator cap when the engine has completely cooled off. Obviously have the water pump repaired as soon as possible.
No