corrosion of what?
nothing can, at least not feasible and economical to transform corroded part to its metal state. Corrosion is a irreversible process.
The green powdery corrosion on copper wires is likely due to exposure to moisture or humidity. To cure this, you can clean the affected area with a mixture of vinegar and salt, scrub gently with a brush, rinse with water, and ensure the area is completely dry before reassembling. To prevent future corrosion, seal the wires with a protective coating or wrap them with electrical tape.
Corrosion Resistance
1) stress corrosion 2) corrosion fatique 3) fretting corrosion 4) heat treatment
This Corrosion was created in 1987.
Philip A. Schweitzer has written: 'Corrosion-resistant piping systems' -- subject(s): Piping, Corrosion 'Fundamentals of corrosion' 'Corrosion of polymers and elastomers' 'Corrosion-resistant linings and coatings' -- subject(s): Protective coatings, Corrosion and anti-corrosives 'Corrosion resistance tables' -- subject(s): Tables, Corrosion and anti-corrosives
Acetic (Acetoxy) silicone sealants release acetic acid (which smells a little like vinegar) as they cure. The will cure faster but do not stick very well compared to Neutral cure types Neutral (meaning neutral alcoxy) silicone sealants release alcohol as they cure, and has almost no smell, but take about 3 times longer to set up than acetic curing sealants. The do have overall a higher "grip" than Acetic types.
The verb form of corrosion is corrode.
a process that relies on corrosion
Corrosion is a noun.
A great starting point to learn about corrosion is on the National Corrosion Society web page. They provide in-depth explanations of what corrosion is and how it forms. They also provide monthly newsletters on the latest developments to fight corrosion.
Corrosion, rust, build up, nasty mess, but he most common is "corrosion", then "rust".
in my opinion, the value of corrosion rate obtained from certain reading is generally determine general corrosion rate, regardless what type of corrosion occur on a specific surface. in localized corrosion, where only some spots on surface is exposed to corrosion and other may be covered by film and etc. From my time of study, still didn't fine any research that can determine corrosion rate of localized corrosion unless u have a really micro- instrumentation that can monitor corrosion on the localized spots.. Izzudin saujana2@gmail.com