Most engines lose compression over time, but each cylinder should have roughly equal compression. Even if compression numbers are not equal, however, it's usually not worth the expense to fix this.
no
In order to check for a worn cam load you have to run a compression test a change in pressure will tell you if it's worn.ÊYou cannot fix a worn cam it must be replaced.
how to fix a cylinder #1 has low compression diagnose on 2.9 chvy colorado 2007
http://www.ofzenandcomputing.com/fix-mac-blue-screen-boot/
Need to know what is wrong with it before we can help Joe fix it.
You have to take out the cylinder, how low is it, what is the difference
This all depends on why it has low compression. If the rings are worn out, the motor should be rebuilt. If one of the valves is bad, re grinding it or replacing them is the fix. Perform a cylinder leakage test to confirm it. You will probably need to take it to a shop for this, but unfortunately, there usually are no quick fixes for low compression.
With RICE R is for rest I is for ice C is for compression E is for elevation
First thing to do is replace the plugs and wires if you have not done so. It you have or if replacing them does not fix the problem then have a compression test run.
It could be Iodine, which is a purple/blue antiseptic. By fix I assume you meant that you dog had been to a vet?
To fix an engine with no compression first try replacing the spark plugs. Remove the spark plug wire and then remove the spark plug. Replace the plug with a new one. Reattach the wire. Replace all of your plugs and see if your engine will fire.