0
1 cubic meter = 35.315 cubic feet. 1 cubic foot of natural gas contains 1,000 BTU energy.
1 cubic foot of propane gas contains 2,720 BTU energy.
1 BTU = .2929 Watts
To convert a cubic meter of Natural Gas to a kilowatt, use this formula
kW-hours = cu meters x 35,315 x .2929 x efficiency% x run-time%
And to convert a cubic meter of Propane gas to a kilowatt, use this formula
kW-hours = cu meters x 95,351 x .2929 x efficiency% x run-time%
The efficiency is the AFUE efficiency of the furnace (typically, 75% for an old-fashioned conventional furnace, about 80% for a mid-efficiency, and around 92-97% for a high-efficiency furnace.
If the furnace is running 60 minutes out of the hour, then the run-time% is 100%. If the furnace runs less, you must reduce the kW figure by the same amount. For example, if the furnace runs for 30 minutes out of the hour, enter 50% as your run-time%.
The HVAC Veteran
What else can I help you with?
How do you convert 27505 cubic feet of natural gas into metric tons?
About .58 t
How do you convert NM3 in to metric ton?
To convert NM3 (normal cubic meters) to metric tons, you need to know the density of the gas. Once you have the density, you can multiply the volume in NM3 by the density to get the mass in metric tons. The formula is: Mass (metric ton) = Volume (NM3) x Density (metric ton/NM3).
How do you convert Gas Kw to Kwh?
Multiply the gas units (imperial) by 100, then divide by three. This will give you how many kilo watts an hour. If you want a more accurate answers, multiply the gas units by 31.6. For metric metres (cubic meteres) multiply by 11.06 to get KWH
Is an M3 Gas Meter a Metric one?
if the m stands for cubed which it usually does, then yes, the metre cubed is a metric measurement
What is a metric gas pump unit?
Litres
How many kilogram of gas in mmbtu?
To convert from million British thermal units (MMBtu) to kilograms of gas, you need to know the specific type of gas being referred to, as different gases have different conversion factors. For natural gas, approximately 1 MMBtu is equivalent to 0.0283 metric tons or 28.3 kilograms.
Can you convert a town gas Rayburn G33 to LPG?
i have a raburn gas cooker can i convert it from town gas to lpg
How do you convert cubic meter gas to Mwh?
To convert cubic meters of gas to megawatt-hours (MWh), you need to know the calorific value of the gas, which is usually measured in megajoules per cubic meter (MJ/m³). The conversion process involves first calculating the energy content of the gas by multiplying the volume in cubic meters by the calorific value to get energy in megajoules. Then, convert megajoules to megawatt-hours using the conversion factor (1 MWh = 3,600 MJ). The formula can be summarized as: MWh = (Cubic meters × Calorific value in MJ/m³) / 3,600.
1 msmcmd of natural gas produces how much urea?
1 metric ton of natural gas typically produces approximately 0.65 to 0.7 metric tons of urea.
How can we convert 38000 cubic meters of natural gas to tons at atmospheric-pressure natural gas?
You look up the density of natural gas, make sure it is expressed as kilograms (or tons) per cubic meter, convert it to those units if it isn't, and then multiply the volume by the density.
How do you convert to vapor?
gas
How do you convert your propane gas Bosch to natural gas?
I am wondering if you can convert the lp or propane gas to natural gas on a bosch tankless hotwater heater. I am guessing it has a different orfice and regulator
