without the spring coil the electricity will not be supplied to the ignition of the car.
A coil spring compressor is a piece of repair machinery typically used in car repairs. They help to depress the coil spring in order to remove or replace it.
Because race car
A broken coil spring will cause the effected corner of the vehicle to drop. A broken ignition coil will cause the engine to misfire (coil on plug application) or cease to run.
Only when you start the car
A strut is a combination of a shock absorber and a coil spring
Monte is a coil spring car all four corners. No leaf springs.
leaf or coil.. car will lean to one side.. eventually causin any number of probs
on the left rear under the car . close to the coil spring
The springs in the rear support the weight of the car, and give it a smooth ride along with the shocks.
Two on each side
To replace a coil spring on a 2001 Pontiac Grand Am GT, first, safely lift and secure the vehicle, then remove the wheel and brake components. Next, detach the strut assembly from the vehicle, compress the coil spring using a spring compressor, and remove the old spring from the strut. Install the new coil spring, ensuring it's seated properly, and reassemble the strut, brake components, and wheel before lowering the car back to the ground. Always use proper safety equipment and procedures when handling compressed springs.
I suppose that is possible, however I would not recommend it due to how dangerous it could be. The proper way to remove and intall a coil spring is with a spring compressor, available at you local parts store. O'Reilly Auto Parts has one for $32.99.