my battery is new for mercery mistque 1999 but the light on the dash board goes on and off why
Go to Car-Part.com and you can find many many seats for this car
i found out how to do it.
the controls are on the doors for driver and passenger seats.
To remove the second-row seats from a 2004 Mercury Monterey, start by locating the release levers or bolts at the base of the seats. If they are equipped with release levers, pull them to unlock the seats, then lift and pull the seats out of their tracks. If the seats are bolted down, use a socket wrench to remove the bolts securing them to the floor before lifting them out. Always ensure you have adequate help, as these seats can be heavy and awkward to maneuver.
If it's got bucket seats - why would you want to change to bucket seats?
a fuse?
You can replace Clio seats by first disconnecting the battery if the seats are electric. Remove rear and front seat protectors, then remove the bolts. Carefully lift the seat and disconnect any wiring. You can then replace the seat, wire it up if it's electric and clamp it back down with the bolts.
the club coupe has two bucket seats in the front and a back seat. the rest have a bench seat.
Power seats are usually on a breaker, not a fuse.
To remove the seats in the Mercury Villager you first need to pull the side lever and push the seat forward. Next, pull the release strap. Lift the back of the seat until the seat clears the latch. Pull rearward and remove from the vehicle.
its in a black box in under your seats. dont mess with it.
switches are located on the lower side facing the door panel.