0
To jump start a Vauxhall Vivaro van, start by removing the battery cover. Taking your cables, connect one end of the lead to the positive terminal on the discharged battery, then connect the other end of this lead to the positive terminal on the battery you are jumping from. Take the other lead and connect it to the negative terminal on the discharged battery. Next, use the end of this lead to connect somewhere to ground the current; for example, the engine block or screw connection in the engine suspension on the vehicle providing the jump. When finished, remove the leads in the exact opposite direction you applied them.
What else can I help you with?
Where is the air filter on vauxhall vivaro van?
Under the bOnnet
Where is the dipstick for gearbox on a vauxhall vivaro van?
From a Renault dealer!
How many miles you can do with your vauxhall vivaro van with a full tank of diesel?
670
Cam belt change on a vauxhall vivaro van?
72,000 miles or 5 years
Where are the fuses for a Vauxhall vivaro van?
Open the passenger door and pull the cup holder cover and its behind that.
How do you change fuel filter vauxhall vivaro van?
You can do one or two things; take your van to the mechanic or do it yourself. If you choose to do it by yourself the fuel filter is located in the engine.
Hi i have a vauxhall vivaro van the problem i have with it is that the off side indicators turn on and off as they please can you help?
loose connection somewhere-->take to mechanic
How do you reset immobilizer on a vivaro van?
To reset the immobilizer on a Vauxhall Vivaro van, you typically need to use the vehicle's key fob. Start by inserting the key into the ignition and turning it to the "ON" position without starting the engine. Leave it in this position for about 10 minutes until the immobilizer light goes off. Afterward, turn the key off and then try starting the engine. If this does not work, consult the vehicle's manual or a professional for further assistance.
How wide is a vivaro van?
The width of a Vauxhall Vivaro van typically ranges from about 1.90 meters (74.8 inches) to 1.96 meters (77.2 inches), depending on the specific model and configuration. This measurement does not include the mirrors, which can add additional width. Always check the manufacturer's specifications for the exact dimensions of the specific model you are interested in.
Where is dip stick located on vauxhall vivaro van?
The dipstick on a Vauxhall Vivaro van is typically located near the front of the engine, usually on the right-hand side when facing the engine. It is a long, thin metal rod that you can easily pull out to check the oil level. Look for a brightly colored handle, often yellow or orange, making it easier to identify. Always ensure the engine is off and cooled down before checking the oil level.
What fuse do I change for dashboard lights for Vauxhall vivaro van?
To change the fuse for the dashboard lights on a Vauxhall Vivaro van, you'll need to check the fuse box, which is typically located under the dashboard on the driver's side or in the engine compartment. Refer to the vehicle's owner manual for the exact fuse number associated with the dashboard lights, as it can vary by model year. Once identified, pull out the faulty fuse and replace it with one of the same amperage. Always ensure the van is turned off before replacing any fuses.
How do you fit alternator belt on vauxhall vivaro van?
To fit the alternator belt on a Vauxhall Vivaro van, first, ensure the engine is off and cool. Loosen the tensioner pulley by using a wrench on the tensioner bolt, then remove the old belt. Route the new belt around the pulleys according to the belt routing diagram, ensuring it sits properly in the grooves. Finally, tighten the tensioner to apply the correct tension to the new belt and check its alignment before starting the engine.
