0
What else can I help you with?
How do you remove gearbox on Hyundai excel?
To remove the gearbox from a Hyundai Excel, first, ensure the vehicle is securely lifted and supported. Disconnect the battery, then remove any necessary components such as the drive shafts, linkage, and crossmember. Unbolt the gearbox from the engine and transmission mounts, and carefully lower it from the vehicle. Be sure to follow safety procedures and consult the vehicle's service manual for specific details and torque specifications.
What is the torque settings for a Hyundai matrix?
hyundai matrix 1.8L cylinder head torque
How do you remove the gearbox on a Mitsubishi pajero?
gearbox
Where is the speed sensor on a 2005 Hyundai sante fe?
on to of the gearbox
How do you replace gearbox oil in a Hyundai Excel 1999?
To replace the gearbox oil in a 1999 Hyundai Excel, first ensure the vehicle is on a level surface and secure it with wheel chocks. Remove the drain plug located at the bottom of the gearbox and allow the old oil to fully drain into a suitable container. Once drained, replace the drain plug and remove the fill plug, then use a pump to add the appropriate type and amount of new gearbox oil until it reaches the fill level. Finally, replace the fill plug and check for leaks.
How do you change gearbox oil on a getz?
To change the gearbox oil on a Hyundai Getz, first ensure the vehicle is on a level surface and securely raised. Remove the gearbox drain plug and let the old oil drain completely. Once drained, replace the drain plug and remove the fill plug on top of the gearbox. Finally, use a funnel to add the recommended type and amount of new gearbox oil through the fill hole, then replace the fill plug securely.
What gearbox fits a Hyundai Santa Fe?
i don't know man.
How do you change heater matrix on 2004 Hyundai Santa Fe?
To change the heater matrix on a 2004 Hyundai Santa Fe, first, disconnect the battery and remove the dashboard trim to access the heater core. Drain the coolant from the radiator and disconnect the hoses connected to the heater matrix. Remove the mounting screws or bolts securing the heater core in place, and then carefully pull it out. Install the new heater matrix by reversing the removal steps, ensuring all connections are secure before reassembling the dashboard and refilling the coolant.
How do you remove a Hyundai Getz gearbox?
Just swapped a 1.1 getz geabox a bit fidly but not too bad-remove front subframe pull out drive shafts disconnect steering and roll bar disconnect gear change and electrical plugs(2) undo gearbox mount drop engine slightly and support split gearbox away from engine and remove downwards it took me about 9 hours but I don't do this for a living regards Dave k
Where can one purchase a Hyundai Matrix?
There are several different options in order to purchase a Hyundai Matrix. Some options include for example "Auto Trader", "ExchangeAndMart" or "Buy a Car".
Where is the manual gearbox filler point on a 1999 Hyundai excel twin cam?
On a 1999 Hyundai Excel Twin Cam, the manual gearbox filler point is typically located on the side of the transmission case. You should look for a threaded plug, usually positioned towards the upper part of the transmission. To access it, you may need to raise the vehicle and possibly remove any obstructions. Always ensure the vehicle is on a level surface when checking or filling the gearbox oil.
How do you remove a selector shaft from a Renault laguna gear box?
Because of some french idiots, you have to remove the gearbox. And to remove the gearbox... omg
