answersLogoWhite

0

To get at the motor,you must first remove the door trim.Model dependant,you will probably have to lever off the speaker cover,door mirror switch and handle bezel.Remove 4 screws and unclip carefully.You have to unplug the motor and drill out the rivets holding it on.(10 ish)There is a single bolt holding the linkage support.It's a bit of a fiddle slipping off the mechanism from the window.You will need a pop riveter to fit the new unit.Adjust the channels,not too loose or tight before securing the bolt.Re-initialise the motor by sending window up and holding down the switch for 5 seconds.

User Avatar

Wiki User

18y ago

What else can I help you with?