not sure if this help i got a 05 54 plate and some thing happend to my fob a freind of mine said turn the key to the 2nd position and press the unlock button and sould reset worked for me
This will only work if the remote you are programming has already been programmed to your vehicle. For example if your battery went dead on the remote or it just lost its programming. These instructions WILL NOT program a new remote to you car. To program a new remote to your car a dealership.
1 - Get in car, close doors, turn key to ACC.
2 - Hold open button down until blinkers flash.
No
what answer!
You normally do not have to reprogram the key when you replace the battery. If you do you will have to contact your VW dealer.
You'll probably need to have this done at a dealership.
To reprogram a key fob for your Hyundai Tiburon, start by sitting in the driver's seat with the doors closed. Insert your key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Repeat this process within 10 seconds, turning the key to "On" and then "Off" a total of five times. After the fifth time, you should hear a chime indicating that the vehicle is in programming mode; then press any button on the key fob to complete the programming.
2006 jetta tdi both key remote not working
the bastards at the dealership have to do it...had it done, not cheap.
Take it to your dealership they would be the one to help you with that.
your key fob can only be programed by the local gm dealer.
To reprogram the key fob for a 2002 Mercedes, first, ensure you have all the keys you want to program. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the "Lock" button on the key fob for about 5 seconds, then release it. Turn the ignition off and remove the key; the fob should now be reprogrammed. If you have multiple fobs, repeat the process for each one.
To reprogram a key fob for a Renault Clio, first, ensure that the vehicle is unlocked and that you have the working key fob. Insert the key into the ignition and turn it to the "On" position without starting the engine. Press and hold the lock button on the key fob for a few seconds, then turn the ignition off. This process may vary slightly depending on the model year, so consult your owner's manual for specific instructions if needed.
It can cost as much as about 300 dollars to re-key the average car. This varies depending on the type of ignition and the type of key.