answersLogoWhite

0

114,000 BTU/gallon

User Avatar

Wiki User

8y ago

What else can I help you with?

Related Questions

How many BTUs per gallon of petrol?

About 114,000 BTU per US gallon.


How many BTU's per gallon of kerosine?

One gallon of kerosene will produce 134,000 BTUs of energy when burned.


How many Btu's are in a gallon of fuel oil compared to a gallon of propane?

A gallon of fuel oil typically contains about 138,500 BTUs, while a gallon of propane provides approximately 91,500 BTUs. This means that fuel oil has a higher energy content per gallon compared to propane. Therefore, when considering energy output, fuel oil is more efficient in terms of BTUs per gallon.


What is the Gallon Per Hour use of a kerosene heater?

Depends on the BTUs of the heater.


How many btu per hour propane?

Propane has an energy content of approximately 91,500 British Thermal Units (BTUs) per gallon. When converted to BTUs per hour, the amount depends on the rate of consumption; for example, a typical propane heater might consume about 1 gallon per hour, producing around 91,500 BTUs per hour. The exact BTU output can vary based on the efficiency of the appliance and its specific design.


How many BTUs are there in a gallon of Kerosene?

1 gallon for #1 Kerosene produces 135,000 BTUs. #1 Kerosene is closely related to #1 Diesel and JP8 (Jet Fuel) - they differ chiefly in additives. Likewise, #2 Kerosene, Diesel #2, and Furnace Oil are similar to one another. #2 oils have higher sulfur content, which leads to more eye and lung irritation from the emissions. However, they are also comprised of longer hydrocarbon chains, and therefore weigh more per gallon and also have somewhat higher energy content.


How many btu's per gallon of Coleman fuel?

Coleman fuel, also known as white gas, contains around 21,000 BTUs per gallon. This makes it a relatively high-energy fuel source for camping stoves and lanterns.


How long will a gallon of Kerosene burn at 30000 btu hours?

A gallon of kerosene typically contains about 135,000 BTUs of energy. At a burn rate of 30,000 BTUs per hour, a gallon of kerosene would last approximately 4.5 hours (135,000 BTUs ÷ 30,000 BTUs/hour = 4.5 hours). However, actual burn time can vary based on factors such as efficiency and burner design.


How Many BTU's per barrel of crude oil?

Approximately 5,800,000 BTUs per 42-gallon barrel.


How many BTUs are in a gallon of propane?

Type your answer here... there are around 91,600 BTUs in a gallon of propane. The standard BBQ sized bottle of propane contains 11 pounds of propane. Propane weighs about 4.2 pounds per gallon, so that 11 pounds of propane is about 2.5 gallons in its liquid state. That means there is 91,600 BTUs/Gal times 2.5 gallons so a BBQ sized tank of propane contains about 2.3 million BTUs. If your BBQ has a 50,000 BTU burner, on high heat, it will last a bit over 4 and half hours of run time.


How many Btus of heat are removed per hour when the water at a flow rate of 10 pounds per minute is cooled 15 degrees Fahrenheit (Water weighs 8.33 pounds per gallon)?

To calculate the BTUs removed per hour, use the formula: BTUs = flow rate (lbs/min) × temperature change (°F) × 1.0 (specific heat of water). First, convert the flow rate to pounds per hour: 10 lbs/min × 60 min/hour = 600 lbs/hour. Then, calculate the BTUs: BTUs = 600 lbs/hour × 15°F × 1.0 = 9,000 BTUs/hour. Thus, 9,000 BTUs of heat are removed per hour.


If your car does 8 miles to a gallon how much would it cost you to travel 1600 miles?

1600 miles / 8 miles per gallon = 200 gallons. Multiply this by the cost of gasolene per gallon. Since the cost varies in different places and times, you will have to research this yourself for your particular situation.