10.92 Amp
at 230v it will use 5 to 6 amps
5
At 120 volts it will pull 4.166 amps. At 240 volts it will pull 2.08 amps.
A 25,000 BTU air conditioner typically pulls around 10 to 15 amps, depending on its efficiency and design. To convert BTUs to amps, you can use the formula: Amps = BTUs / (Volts x Efficiency), where standard voltage is often 230 volts for larger units. It's essential to check the specific model's specifications for accurate amperage.
Aprox 12 amps.
A 120 volt table lamp with a 75 watt bulb will pull 0.625 amps. With a 100 watt bulb it will pull 0.833 amps. And with a modern fluorescent 13 watt bulb it will pull 0.108 amps.
About 2.25 Amps.
The current draw of an 18,000 BTU air conditioner typically ranges between 15 to 20 amps, depending on its efficiency and design. For example, a standard unit might draw about 15 amps, while a more energy-efficient model could be at the lower end of that range. It's important to check the manufacturer's specifications for the exact amperage. Additionally, consider the voltage of the unit, as this will also impact its overall power consumption.
On a 50 amp 3 phase connector, you can pull 50 amps per leg. This means that each of the three phases can carry up to 50 amps individually, resulting in a total capacity of 50 amps per leg.
A 10,000 BTU air conditioner typically draws between 8 to 12 amps, depending on its efficiency, type, and specific model. Most window units will be on the lower end of this range, while portable or higher-efficiency units might draw more. It's important to check the manufacturer's specifications for the exact amperage. Additionally, ensure that your electrical circuit can handle the load safely.
This typically has to do with how many amps you can safely pull from the secondary of the transformer.
Read the tag on the condenser, it will be noted as LRA. Be sure to check the LRA for the fan as well and add them together for the total. If it is not listed on the tag it will certainly be listed seperately on both the compressor and the fan motor. LRA = Locked Rotor Amps.