In alternators, the welding current is produced on the stator winding due to the electromagnetic induction process. When the rotor, which is a magnet, rotates within the stator, it creates a varying magnetic field that induces an alternating current (AC) in the stator windings. This induced current can then be used for welding applications by converting it to the appropriate form and intensity required for the welding process.
Alternators produce Direct Current, Generators produce Alternating Current. Todays' cars have Alternators to charge the batteries.
Alternators usually produce AC current but in an automobile the current is fed through diodes which coverts it to DC power that the car can use.
This question is not clear since alternators produce alternating current.
Generators produce electricity as direct current and Alternators produce electricity as alternating current. As alternators produce electricity more effeciently, and they are smaller and lighter and are used in modern vehicles.A generator creates direct current in the manufacture of power. An Alternator creates alternating current in the creation of power. Alternators can have diodes installed internally so that they have a D.C. output.
Yes. Alternators supply alternating current.
Electricity generators were often traditionally called magnetos (especially on automoblies and tractors) and are also called alternators. Generally speaking, alternators and magnetos produce AC (alternating current), while generators produce DC (direct current), thought the terms are often used without regard to the type of current produced.
spot welding is one reason
Direct current can be generated by a generator. Generators are not as efficient as alternators ( that generated AC power ). Vehicles use direct current but come equipped with alternators. The AC power is rectified ( changed to DC ) for use.
Physically, yes. However, where alternators differ, is in the produced, amps. If both cars have equal electrical amenities, then it will work.
TW = thermite welding, a welding process that requires no external source of heat or current.
welding current for 2mm thick. ms plate
Regulating the medium of welding according to the needs