solenid switch engages and disengages the bendix on the starter
This switch is designed to be sure that the car won't be moved by the starter motor. It requires that the car be in neutral, park, or have the clutch depressed before the starter motor will engage.
You can find the 1991 Nissan starter motor relay switch in the fuse box. The starter motor relay switch will be in the third column, second from the bottom.
When opened by the starter switch, it sends electricity from the battery to the starter motor to start the car.
It is false that the stat ignition switch position only activates the starter motor.
please answer my question
A motor starter is a contactor (heavy duty relay) which acts as a remote-controlled on/off switch between the supply and the motor. Its operating coil is energised through an auxiliary stop/start circuit. It also incorporates overload function which will automatically disconnect the motor in the event of a sustained overload current.
The Bendix on a Ford starter is a one-way gear that engages when the starter is activated. and the Bendix is perhaps one of the most common starter failures.
If you battery has plenty of power, either faulty contacts in ignition switch or starter motor, or faulty starter motor.
A direct line starter is a simple motor starter used to power electric machines. It works by coupling the motor to the power supply directly at full function.
No a solenoid switch (full name) does not control a cars electrical system. The solenoid is an electrically operated switch that sends power to the starter motor which in turn cranks the car's engine to start it. The reason a second (electrical) switch is needed to crank the starter motor, is that the starter motor requires such high voltage that the key would melt if all that power were to run through it. In other words; When you turn the key you are sending a small amount of power to the solenoid switch which in turn sends a large amount of power to the starter motor.
On my 1995 Ford Explorer , as far as I know , the starter solenoid is mounted on the starter and the starter relay ( which most people just refer to as the solenoid ) is mounted near my battery and has the positive battery cable connected to it ( a relay is a low voltage switch ) P.S. I'm not a mechanic / technician
if the starter is not spinning and the truck motor is running