A window regulator is a mechanical device in a vehicle that controls the movement of the windows, allowing them to be raised or lowered. It typically consists of a series of arms and a track that guides the window during operation. The window motor is an electric component that powers the regulator, providing the necessary force to move the window. Together, they enable the smooth operation of power windows in cars.
Remove the window regulator assembly from the door.Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.Connect the window motor to the regulator with 3/16 in. rivets.Install the window regulator assembly.
How to remove the window motor from the regulator
Window motor and regulator are found inside of the door panel and may be bolted or riveted in. Should be bolted. Disconnect the window from regulator, take out reg. and motor, then disconnect regulator from motor, reconnect new motor to regulator, reattach those inside of the door, then reconnect the window to the regulator, put it together and see if it works.
probably window regulator
window regulator cable is broken need new regulator
HOW DO I REPLACE WINDOW REGULATOR MOTOR ON PASSENGER SIDE WINDOW
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
You have to drill the rivets on the motor separating it from the regulator. The new motor then mounts to the regulator and you insert the new bolts where the riverts were.
remove your door panel there will be three screws holding it on. then you have to remove the screws holding your window to the regulator. then unbolt regulator and motor from door. Undo wiring going to motor.
if manual, window regulator. if electric, check fuses, window switch, window motor, window regulator.
No
they are in the doors. the regulator is what makes it go up and down and is attached to the window motor.