If your Echo GT-2000 trimmer starts but won't keep running, it could be due to several issues. Common causes include a dirty air filter, clogged fuel filter, or a faulty spark plug. Additionally, check the fuel mixture—make sure you're using the correct ratio of gas to oil. Cleaning or replacing these components can often resolve the problem.
open the fuel tank filler cap and dump the fuel/oil mixture out.
To fix an Echo GT 200 series trimmer, start by checking the fuel mixture, ensuring it’s the correct 50:1 ratio of gasoline to 2-cycle oil. Inspect the air filter for clogs and clean or replace it if necessary. If the trimmer won’t start, examine the spark plug for wear or damage, replacing it if needed. Finally, check the ignition system and the carburetor for blockages or malfunctions, as these are common issues that can prevent proper operation.
To change the gas tank on an Echo 2000 trimmer, first, ensure the engine is cool and the fuel is emptied. Remove the screws or clamps securing the old gas tank, then disconnect any fuel lines attached to it. Install the new gas tank by connecting the fuel lines and securing it in place with the screws or clamps. Finally, refill the tank with the appropriate fuel mixture and check for leaks.
Fuel mixture is 16:1
In California our fuel should be mixed at 50:1
50:1
what is the gas mixture for an echo leaf blower P B260 L
For an Echo weed trimmer, the recommended fuel mixture is typically 50:1, which means you should mix 2.6 ounces of 2-cycle oil with 1 gallon of unleaded gasoline. Always check your specific model's user manual to confirm the correct oil-to-gas ratio, as it may vary slightly. It's essential to use a high-quality, low-ash 2-cycle oil to ensure optimal performance and longevity of your trimmer.
I purchased my Toro weedeater in 2007. It uses a 50:1 gas/oil ratio.
2.6 oz per gallon or 20cc per liter. I.e., 50:1
The Homelite trimmer UT20930 requires a fuel mixture of 50:1, which means you should mix 2.6 ounces of 2-cycle oil with one gallon of unleaded gasoline. Always use fresh, high-quality gasoline and ensure the oil is specifically formulated for 2-cycle engines. Mixing the fuel properly is essential for optimal engine performance and longevity.