Idle up is a feature commonly found in remote-controlled model engines, particularly in RC cars and aircraft. Its primary function is to automatically increase the engine's idle speed when certain conditions are met, such as when the throttle is at a neutral position. This helps to prevent stalling, ensures smoother transitions to higher speeds, and improves overall engine responsiveness. By maintaining a higher idle, it also aids in better fuel flow and reduces the risk of the engine flooding.
You will not be able to turn .
The idle rich or washed up or between films.
idle speed controll or tps throttle sensor
Some later models, 2001 onwards, don't have an idle control valve. The function is designed into the Electronic Throttle.
It should idle at aprox 650 rpms warmed up.
check your Idle sensor which is attached to your throttle body. This ussually goes bad and tends to rev the idle up. I had the same problem with my 99 wrangler.
hi I have. A 1988 samurai and when I start it up it will not idle up at all I have to give it gas to idle up wondering if there's something I can do.
The idle for a 1986 Honda Accord is adjusted by a idle air control valve. These function by either tightening or loosening the valve. This controls how much air is allowed into the system, more air means higher idle and less means lower.
The idle air control valve on a 1990 Ford Escort is located on the intake manifold. An idle air control valves function is to control the amount of air that is allowed to enter the engine so the idle can stabilize.
Check/ replace the TPS if the idle is up and down.
I was !
The IAC (idle air control) at the throttle body is usually the problem.