0
Check if your pilot light is on. If it is, then there is a fault in the gas regulator and you will need to call a gas technician.
-If the pilot is off, The detailed directions are printed on front of EVERY gas regulator. - However, in general terms, turn regulator switch to OFF for 2 minutes, then to PILOT and depress for one minute, then light pilot or press clicker till it lights. Keep PILOT pressed for 2 more minutes then slowly release it. If it stays on then turn main switch to RUN or ON. Use a barbecue match (12 inch long) to light manual pilots. -If the pilot will NOT stay on, then you have a faulty thermocouple. - Not a complicated job. Call a competent handyman or gas tech.
What else can I help you with?
How can I determine if the water heater pilot light is out?
To determine if the water heater pilot light is out, locate the pilot light access panel on the water heater. Look inside to see if the pilot light is lit. If it is not lit, you may need to relight it following the manufacturer's instructions.
How can I check the water heater pilot light?
To check the water heater pilot light, locate the access panel on the water heater and look for a small flame. If the flame is out, follow the manufacturer's instructions to relight it safely.
Why did the pilot light go out on the water heater?
The pilot light on the water heater went out because there was a lack of gas flow or a problem with the ignition system.
What is a orifice on water heater?
Gas water heater has an orifice for main burner and for pilot light, if not electronic ignition.
Why is the water heater light off?
The water heater light may be off due to a power outage, a malfunction in the heater, or a problem with the gas supply. It is important to check these factors to determine the cause of the issue.
Why does my water heater pilot light keep going out?
The pilot light on your water heater may keep going out due to a variety of reasons, such as a faulty thermocouple, a dirty pilot light orifice, inadequate gas supply, or a draft near the water heater. It is important to have a professional inspect and repair the water heater to ensure safe and efficient operation.
Why won't the water heater pilot light stay lit?
The water heater pilot light may not stay lit due to issues with the thermocouple, gas supply, or ventilation. These problems can prevent the pilot light from staying lit, leading to the water heater not functioning properly.
How do I turn on a hot water heater?
To turn on a hot water heater, locate the pilot light or ignition switch on the unit. Follow the manufacturer's instructions to safely ignite the pilot light or turn on the heater using the ignition switch. Allow the water heater to heat up before using hot water.
How much gas does a water heater pilot light use?
A water heater pilot light typically uses about 3-5 cubic feet of gas per day.
Does the water heater still fill with water when the pilot light is off?
Yes
When the pilot light is off does the water heater still fill up?
The water continues to run into and out of the water heater. There is just no flame to heat it up.
Hot water heater pilot light works heater wont light?
Have you turned the control from Pilot to On? Have you increased the temperature setting?
