0
What else can I help you with?
How many amps does a 3000w inverter 240 v draw from a 12 volt system?
It would be at least 250 amps, maybe 300 amps.
How many amps does a 12 volt light draw?
Have to know the wattage or resistance of the lamp to answer this question.
What size of 12v transformer will run 600watts?
Amps * Volts = Watts Amps * 12 = 600 600/12 = Amps = 50 amps You would need a reserve capacity, so I'd go somewhere between 60 or 100 Amp rated transformer. Transformers are rated in volt-amps which is usually calculated the same as watts. But the term "watts" technically does not apply to transformers. So you need a 600 volt-amp transformer or, as Redbeard has suggested, you need an 800 or 1000 volt-amp transformer. That's a lot of amps for a 12 volt system so I recommend you double check your requirements. You will need a #2 gauge wire if your requirements are correct.
What is the proper size wire cord for a 12 amp vacuum sweeper 120 volt?
16 gauge is rated at 13 amps, but I would use 14 gauge which is rated at 15 amps just to be safe.
What is the recommended wire size for installing a 1800 watt amplifier?
If you are talking about an amplifier to be installed in a vehicle with a 12 volt system then you would use the formula to find the amps. I = W/E. 1800/12 = 150 amps. A 1/0 copper wire is rated at 150 amps.See relate links below.
How many volt amps in 12 volt battery?
Depends on the battery. It is listed on the battery as Cold Cranking Amps (CCA).
How many amps does a 3000w inverter 240 v draw from a 12 volt system?
It would be at least 250 amps, maybe 300 amps.
How many amps would a 15watt radio draw in the transmit mode with 12 volt being supplied to the radio?
1.25 amps
How many watts does my 12 volt 2 amp battery charger draw?
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
How many amps does a 12 volt light draw?
Have to know the wattage or resistance of the lamp to answer this question.
How many amps if there is a 12 volt electrical system and 50 ohms resistance?
0.24 ampere
Is there a way for coverting amps into watts in a 12 volt applacation?
To convert amps to watts in a 12-volt application, you can use the formula: Watts = Volts x Amps. Therefore, in a 12-volt circuit, if you have 1 amp of current, the power consumption would be 12 watts (12V x 1A).
How many amps does a Hayward 1 Hp Pool Pump Motor use?
1 HP = 745.70 wattsPower (watts) = Current (amps) x VoltsSo if you use a 110 volt system, amps = 745.7/110 = 6.779 ampsIf you use a 220 volt system, amps = 745.7/220 = 3.389 ampsFor a 12 volt system, amps = 745.7/12 = 62.142 amps
12 volt 9.6va what does this mean in amps?
9.6va (or watts) divided by 12Volts = 0.8 amps
500 watts is how many amps?
The same number as 250 oranges is apples. A watt is a volt times an ampere.
What is the amps In a simple electric circuit with a 12 volt supply and a 24 ohm resistor?
0.5 amps
Can you hook a car amplifier to a home stereo?
No you cannot house amps use 120 volt ac car amps use 12 volt dc
