the answer is .017 kilohms. To get this answer you will do a unit converions knowing that 1 kilohms is equal to 1 ohm.
So...
17 ohm * (1 kohm/1000 ohm) = .017
That is 366,300 ohms.
When we see the prefix kilo, it means times one thousand, or x 1000. If we have 9.54 kilohms, we have 9.54 x 1000 ohms = 9,540 ohms.
No, 200mA is not the same as kilohms.Amperes is a unit of current flow. Ohms is a unit of resistance. Other than being related by Ohm's law - Voltage = amperes x ohms - the two units are not the same.
The answer is 1.5 ohms. The 'R' is a multiplier (x1), and its position is the decimal point. So 1R5 means 1.5. Similarly, 15R would mean 15 ohms, and R15 would mean 0.15 ohms. If the letter 'k' was used, then 1K5 would mean 1.5 kilohms If the letter 'M' was used, then 1M5 would represent 1.5 megohms, etc.
3000 ohms are 3 kiloohms.
That is 366,300 ohms.
First of all, let's get the units of measurement correct, which are kilohms (not 'kil ohms'), megohms(not 'magha ohms'), milliohms, and picohms(not 'pico ohms').Resistors are generally rated in ohms, kilohms, and megohms because, generally, these are the values most widely needed in practical applications.
Well, darling, 89000 ohms can be expressed using the metric prefix as 89 kilohms. So, there you have it - 89000 ohms is the same as 89 kilohms. Keep on electrifying!
A megohm is 1000 kilohms. So 295k is 0.295M
To convert ohms to: microohms - multiply by a million milliohms - multiply by 1000 kilohms - divide by 1000 megohms - divide by a million
When we see the prefix kilo, it means times one thousand, or x 1000. If we have 9.54 kilohms, we have 9.54 x 1000 ohms = 9,540 ohms.
No, 200mA is not the same as kilohms.Amperes is a unit of current flow. Ohms is a unit of resistance. Other than being related by Ohm's law - Voltage = amperes x ohms - the two units are not the same.
33 kilohms = 0,033 megohms
The answer is 1.5 ohms. The 'R' is a multiplier (x1), and its position is the decimal point. So 1R5 means 1.5. Similarly, 15R would mean 15 ohms, and R15 would mean 0.15 ohms. If the letter 'k' was used, then 1K5 would mean 1.5 kilohms If the letter 'M' was used, then 1M5 would represent 1.5 megohms, etc.
kilohms.
On a digital ohmmeter, a resistance of 10,000 ohms (10 kΩ) will typically be displayed as "10.00 kΩ" or "10,000 Ω," depending on the meter's settings and resolution. The display may also show a "k" to indicate that the value is in kilohms. If the meter has auto-ranging capabilities, it will automatically select the appropriate range to show the measurement clearly.
A 4k7 resistor is a resistor with a resistance value of 4.7 kilohms, or 4,700 ohms. The "4k7" notation is a shorthand used in electronics, where the "k" stands for kilo (1,000), and the "7" indicates the additional 0.7 kilohms. This type of resistor is commonly used in various electronic circuits for current limiting, voltage division, and signal processing applications. Resistors like the 4k7 are available in different power ratings and tolerance levels, depending on the specific requirements of the circuit.