Pull an 8 conductor or two 4`s just to be safe. If he has to ask this question I would have my doubts in his abilities. Just for the record though. 1 for the power supply R, 1 for the compressor, 1 for the reversing valve, 1 for the fan, 1 for each stage of the electric heat strip ( # of stages on stat must match # on heater ) and finally 1 for the common if the stat requires it. That leaves you with a minimum of 5 and a maximum of 7.
Current draw and length.
Without conductors, electrons do not flow where you want them to flow. An electrical circuit is a flow of electrons.
'Bundled' conductors describe a line in which two or more conductors are supported from the same insulator chain. In the UK, 275-kV transmission lines typically use two conductors per line, and 400-kV transmission lines typically use four conductors per line. The purpose of bundling conductors is to spread the electric stress on the conductors (e.g. for four conductors, the same amount of electric flux will be 'shared' between the four conductors, rather than concentrated on the surface of one conductor).
210
An electric current (symbol: I) is a very slow drift of charge carriers (electrons, in metallic conductors), and is measured in amperes (symbol: A). An ampere is defined in terms of the 'magnetic effect' of an electric current, that is the force of attraction or repulsion between two, parallel, conductors due to the interaction of their magnetic fields. An instrument used to measure electric current is called an 'ammeter'.
There are many ways one can lower their electric bill. This includes installing solar panels, reducing the thermostat if you have electric heating and switching off lights when not in use.
Electric conductors.
all metals are good conductors of heat and electric currents
Metals are good electric conductors.
The recommended thermostat for an electric baseboard heater is a line-voltage thermostat designed specifically for use with electric heating systems.
In metal conductors, electric current is the flow of electrons.
A loop of electrical conductors is called a circuit. It provides a path for electric current to flow.
Many - but not all - are poor conductors of electric current.
Common issues that can arise with an electric hot water heater thermostat include inaccurate temperature readings, failure to heat water to the desired temperature, and sudden fluctuations in water temperature. These issues can be resolved by recalibrating the thermostat, replacing faulty components, or adjusting the temperature settings. It is recommended to consult a professional technician for proper diagnosis and repair.
The path of electric conductors is called a complete circuit. It lets electrons a path to flow from their source to the load and back again.
An electric programmable thermostat will save on electric bills by not running durring the evening.
A capacitor is composed of two conductors separated by an insulator, which stores electric charge between the conductors.