No, Sq D and Cutler Hammer breakers are not interchangeable.
It depends on the specific style of the breaker. Bring your T&B breaker to a hardware store or Home Depot and check with the people in the electric department. Many are now interchangeable with ITE, GE and Square D. However, older T&B breakers are not interchangeable.
In general, you cannot directly substitute a Square D breaker for a Cutler-Hammer breaker because they are designed to fit in different types of panels and have distinct specifications. Each brand has unique sizing, connection methods, and circuit protection ratings. If you're considering a replacement, it's essential to use the same brand and model or consult a qualified electrician to ensure compatibility and safety. Always follow local electrical codes and regulations.
Only a Square D designed breaker can be installed in a Square D manufactured panel.
No, if you have a Square D distribution panel only Square D breakers will fit in it.
Square D breakers are generally not compatible with GE panels, as each manufacturer designs their breakers to fit their specific panel configurations and electrical systems. Using a breaker that is not designed for the panel can lead to safety hazards, equipment damage, or voiding warranties. It's essential to use breakers that are specifically rated and approved for your panel type to ensure proper functionality and safety. Always consult the manufacturer's guidelines or a qualified electrician for advice on compatibility.
GE circuit breakers with catalog numbers ranging from THQL1115 through to THQL1150 can be substituted like for like with Cutler-Hammer circuit breakers coded CL115 through to CL150, ITE Siemens circuit breakers coded Q115 through to Q150 and Square D circuit breakers coded HOM115 through to HOM150. These are single pole breakers. GE circuit breakers with catalog codes from THQL2115 through to THQL2150 can be substituted with Cutler-Hammer circuit breakers CL215 through to CL250, Square D circuit breakers HOM215 through to HOM250 and ITE Siemens circuit breakers Q215 through to Q250 of the same amperage and voltage. These are double pole breakers.
GE circuit breakers with catalog numbers ranging from THQL1115 through to THQL1150 can be substituted like for like with Cutler-Hammer circuit breakers coded CL115 through to CL150, ITE Siemens circuit breakers coded Q115 through to Q150 and Square D circuit breakers coded HOM115 through to HOM150. These are single pole breakers. GE circuit breakers with catalog codes from THQL2115 through to THQL2150 can be substituted with Cutler-Hammer circuit breakers CL215 through to CL250, Square D circuit breakers HOM215 through to HOM250 and ITE Siemens circuit breakers Q215 through to Q250 of the same amperage and voltage. These are double pole breakers.
It depends on the specific style of the breaker. Bring your T&B breaker to a hardware store or Home Depot and check with the people in the electric department. Many are now interchangeable with ITE, GE and Square D. However, older T&B breakers are not interchangeable.
the standard or the square D will fit ,you just have to remove 4 little bits plastic and two little bits of metal the rest of the houseing and the rating is very close yes you can also put a torch to the main breaker and burn your whole house down. Some breaker are interchangeable with others, but you should NEVER modify the breaker to fit! Breakers are UL listed to their panels when you install a "unclassified" breaker your UL listing for that breaker and the whole panel is now void.
Breakers are build to snap onto a buss bar in a breaker panel. If they look the same on the back end then they will likely work. If not do not try to force a fit. To add a little more to this: 1st of all it depends on what kind of Square D you are talking about. Square D Homline breakers will fit in a GE panel but GE breakers will not fit into a Homeline panel in my experience. Square D QO is not compatible with either.
Legally, you must use the same brand breaker with the brand panel. They sell Murray breakers at your area electrical contractor shop, but used I am sure. However, square d homeline, siemens ite, GE, cutler hammer BR do fit but will void the UL listing and are dangerous to mix. Upgrade your panelboard. It is old.
In general, you cannot directly substitute a Square D breaker for a Cutler-Hammer breaker because they are designed to fit in different types of panels and have distinct specifications. Each brand has unique sizing, connection methods, and circuit protection ratings. If you're considering a replacement, it's essential to use the same brand and model or consult a qualified electrician to ensure compatibility and safety. Always follow local electrical codes and regulations.
Square D circuit breakers can be purchased from various homeware and DIY stores such as Home Depot or Lowes. Websites that specialise in circuit breakers such as Circuit Breaker Service or All Breakers do sell them as well.
The different types of Square D breakers available for residential electrical panels include standard circuit breakers, tandem circuit breakers, and arc fault circuit interrupters (AFCIs).
Many circuit breakers are designed to fit into specific panels, and while General Switch circuit breakers are not as common, some brands known to have interchangeable options include Eaton, Siemens, and Square D. However, compatibility can depend on the specific panel model and its design. It's always best to consult the panel's specifications or a professional electrician to ensure safety and compliance with electrical codes.
Square D breakers can be bought online on various websites that specialize in the electronics and electronics accessories such as Best Buy and Amazon.
Square D was founded in 1903 and was called Detroit Fuse and Manufacturing. They made breakers that very first year.