Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.
Electricity is used to illuminate light bulbs in lights and light fixtures in your home. They are also used for street lights. Electricity is also used to heat electric stoves; so, those without electricity could obviously cook with gas stoves. Electricity allows you to use your computer, which is probably the most used reference and tool for writing papers, documents, and other necessities for school or jobs. Electricity is used for TV's, which a lot of people use for entertainment and news.
It can help us with light, some charges of electronic stuff, TV, microwave, and many things.
a: LEDS emit different color of light or really different frequency that to us means colors. Some LED are manufacture to provide the full spectrum of frequency. so full spectrum
let us try.........
Well now that we have light we can see everything but without Thomas Edison's invention we can not see or do anything in the nightwithout light so thankyou Thomas Edison
No, a US 110 ceiling light fixture cannot be hardwired directly to a 240V electrical system in France. The difference in voltage will likely damage the fixture and pose a safety hazard. You would need to either use a transformer to step down the voltage or purchase a light fixture that is compatible with the 240V system in France.
Europe uses 230V used to be 240 but was changed a few years back. In France, voltage is 220V and frequency is 50 hertz
Yes it will. The only thing that you have to keep in mind is that in Angola the power is 220V so U'll need a power brick with 220v. Or U can buy a power converter to convert 220v to 110v.
As long as it's a regular incandescent light fixture, and the sockets will accept US bulbs, with provisions for grounding, then yes. You may need to upgrade the wiring to a heavier guage; I'd suggest 14 guage stranded wire through the entire fixture. If it's not incandescent, then no, unless it has a multi-tap ballast.
In the US, the word "lamp" is applied to a lighting fixture (e.g. lava lamp) or other device for producing light.However, the term "lamp" can mean any replaceable lighting component, such as CFLs (compact fluorescent bulbs). The terms bulb, lamp, and tube are often used interchangeably although they have specific meanings within an application.
There are two facets to this question: Can it be used safely, and can it be used legally. This applies to foreign fixtures in any country. This is a matter of the rating on the components. You cannot exceede the voltage capacity of the outlet or it will arc internally. The voltage of the circuit feeding the outlet must be the same as the voltage the outlet is designed for. You can use a 220V US NEMA outlet on European 220V safely, but you can't use a US 110V outlet. Also, the overcurrent device on the circuit must be less than or equal to the maximum current rating on the fixture. A 10A or 15A breaker is okay for a 110V 15A US outlet, a 20A breaker is not. If you respect the voltage rating and insure the current rating will not be exceeded, the fixture should be safe. This is another matter entirely. It is a matter of wether or not whatever regulating body that certified the outlet is recognized in your country. You will need to contact your local building inspector / code inforcement person to find out for sure. I wouldn't get my hopes up.
E-Bay
A fixture or device that holds a light in place by means of some sort of socket, that is connected to a power source.
You will need a small converter as the outlets are different, as is the voltage. NZ is 240 while USA is 110. The converters go for about US$12 - US$20.
I have a sole F60 bought in US and I use it now in France with a transformer ; you never know if you can use it or not, sometimes it works , sometimes not...I don't know why maybe it's a problem of frequency...
the sun
You cannot use them on 220 volts the bulb are for 110 volts.The wiring is ok.