Yes it can. I use flux core wire because there is no need for gas with flux wire.
a stick welder needs to replace his electrode regularly and the flux coating is on the outside while a tig machine constantly feeds the wire and the flux is produced by a filler gas
The capacitor in which only a specific number of electric lines or electrons can pass through a unit area is called as 'Flux Capacitor'
Here is A Simple answer for this question as you know that emf is induced in the conductor when there is change of flux linkage to the conductor which gives rise to the inducement of electric field in the conductor that provide drift velocity to the electrons hence emf is induced in the conductor but the last only till the change in flux in progress and becomes zero as soon as the flux linkages becomes constant hence we summaraize that for inducement of current there must be change in change of flux hence change in electric field that gives rise to allternating emf.
Reluctance is the opposition offered by a magnetic circuit to the formation of magnetic flux. It is equivalent to resistance in an electric circuit.Reluctance is the ratio of a magnetic circuit's magnetomotive force (measured in amperes) to its magnetic flux(measured in webers, pronounced 'vay-bers'). So, reluctance is measured in amperes per weber (which is often 'spoken' as 'ampere-turns per weber'). This is equivalent, in an electric circuit, to the ratio: electomotive force to electric current.
when a current flow through the coil then flux produced around the coil . if the flux linked same produced coil only then the flux is said to be leakage flux. flux produced by one coil ,but linked with another coil then the flu is said to be mutual flux.
a stick welder needs to replace his electrode regularly and the flux coating is on the outside while a tig machine constantly feeds the wire and the flux is produced by a filler gas
Types of flux - Electric and Magnetic Flux. Electric field flux through a closed surface is equal to the change enclosed in the surface, or the rate of change of magnetic flux is equal to the induced voltage around the surface.
As we know that electric flux is the total number of electric lines of forces passing through a surface. Maximum Flux: Electric flux through a surface will be maximum when electric lines of forces are perpendicular to the surface. Minimum flux: Electric flux through a surface will be minimum or zero when electric lines of forces are parallel to the surface.
The units of electric flux are Newtons per square meter, or Nm2.
The symbol for electric flux is ΦE. It represents the amount of electric field penetrating a given surface area.
Yes, electric flux can have a negative value if the electric field and the area vector have opposite directions.
Electric flux depends on the strength of the electric field, the angle between the electric field and the surface, and the area of the surface the electric field passes through. Additionally, the distribution of charges within the field also affects the electric flux.
The unit of electric flux is Volt-meter or Newton-meter^2 Coulomb^-1.
Scalar
The units of electric flux are Nm2/C (Newton meters squared per Coulomb). Electric flux is calculated by multiplying the electric field strength (N/C) by the area (m2) perpendicular to the field.
the difference between lightning and a single cell battery
No, electric flux is a scalar quantity. It represents the total number of electric field lines passing through a given surface.